| Type of treated water | Type I and type III water |
| System power supply | Directly from the water supply system |
| Type I water withdrawal rate | up to 30 l/h |
| Type III water withdrawal rate | 3/5/8 l/h, depending on model |
| The presence of a tank | Built-in 6-liter tank or external tank with volume 30/60 liters. |
| Productivity | 50/100/150 l/day, depending on model |
All-in-one cartridge
The SmartPak® cartridge combines water pretreatment, reverse osmosis, synthetic activated carbon and ion exchange resins technologies to remove ions and particles to trace amounts. To reduce the level of organic impurities, the system configuration may include a 185/254 nm UV lamp as an option. When Direct-Q® is not in use, water automatically recirculates in the system to maintain high quality.
Optimization of the laboratory workplace
The compact Direct-Q® water purification system can be placed almost anywhere in the laboratory: under a desk, on a table or on a wall, allowing efficient use of space in the laboratory. The system does not require special installation and only requires connection to the water pipe and mains, as well as easy installation of the SmartPak® cartridge.
Convenient mobile sampling point
Designed to optimize space in the laboratory, the mobile remote water withdrawal point can be located at a distance of up to two meters from the body of the Direct-Q® water treatment system.
Intuitive graphical display
The key parameters of the system are displayed on the display, which makes it easy to monitor the basic quality parameters of purified water. The display rotates for easy viewing, regardless of the installation option of the system.
Available system configurations
The system can produce 3, 5 or 8 liters of treated type III water per hour, depending on the configuration, and more than 0.5 liters of ultrapure type I water per minute. The Direct-Q 3 system contains an internal tank that allows storing 6 litres of treated water of type III, while the configuration of the Direct-Q 5 and Direct-Q®®® 8 systems includes an external tank with a capacity of 30 or 60 litres.
| Available Direct-Q® configurations | |||
| System configuration options | Direct-Q® 3 | Direct-Q® 5 | Direct-Q® 8 |
| UV lamp 185/254 nm | Yes/No | Yes | Yes |
| Built-in 6-liter tank | Yes | No | No |
| Tank 30/60 liters | Option | Required | Required |
| Remote sampling point | Yes/No | Yes/No | Yes/No |
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Споживання | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Specifications of treated water system Direct-Q® | |
|
Specifications for ultrapure water type I |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT (with UV lamp/without UV lamp) | ≤5 ppb/≤10 ppb |
| Particles, size > 0.22 microns | <1 part/ml |
| Bacteria | <0.1 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <0.01 ng/ml |
| DNAase | <4 pg/ml |
| Specifications for treated water type III | |
| Ion removal | >96% |
| Organic removal | >99% |
| Removal of particles and bacteria | >99% |
| Direct-Q 3® performance | 3 l/hour |
| Direct-Q 5® performance | 5 l/h |
| Direct-Q 8® performance | 8 l/h |
| Technical specifications of Direct-Q® water treatment system | |
| Dimensions (HxWxD) | 54 x 29 x 38 cm |
| Net weight (Direct-Q® 3 system without UV 185/254 nm) | 8.1 kg |
| Net weight (Direct-Q® 3 system with 185/254 nm UV lamp) | 8.6 kg |
| Net weight (Direct-Q® 5/8 systems with 185/254 nm UV lamp) | 7.6 kg |
| Operating weight (Direct-Q® 3 system without UV lamp 185/254 nm) | 17.6 kg |
| Operating weight (Direct-Q® 3 system with 185/254 nm UV lamp) | 18.2 kg |
| Operating weight (Direct-Q® 5/8 systems with 185/254 nm UV lamp) | 12.2 kg |
| Net Weight (Remote Point of Sampling) | 2.15 kg |
| Weight in working condition (Remote point of sampling) | 2.68 kg |
| Built-in tank volume | 6 L |
| Electrical voltage | 100 – 250 V +/- 10% |
| Power frequency | 50 – 60 Hz +/- 10% |
| Connection type at the login | ½” Gaz M |
| Incoming water pressure | from 0.5 to 6 bar |
Consumables
| Consumables for the Direct-Q® system | |
| Cartridge water purification SmartPak® DQ3 | SPR00SIA1 |
| Cartridge water purification SmartPak® DQ8 | SPR08SIA1 |
| Vent filter for external tank | TANKMPK02 |
| Vent filter for internal tank | TANKMPK03 |
| UV lamp | SYN185UV1 |
|
Finish filters |
|
| Biopak® finishing filter | CDUFBI001 |
| Finishing filter EDS-Pak® | EDSPAK001 |
| Finishing filter LC-Pak® | LCPAK0001 |
| Finishing filter VOC-Pak® | V0CPAK001 |
| Finish filter Millipak® Express 20 | MPGP02001 |
|
Type III water conservation tanks |
|
| Tank volume volume 30 l | TANKPE030 |
| 60 l tank | TANKPE060 |
| Automatic sanitization module | SANIKIT01 |
| Type of treated water | Type I and type III water |
| System power supply | Directly from the water supply system |
| Type I water withdrawal rate | up to 30 l/h |
| Type III water withdrawal rate | 3/5/8 l/h, depending on model |
| The presence of a tank | Built-in 6-liter tank or external tank with volume 30/60 liters. |
| Productivity | 50/100/150 l/day, depending on model |
All-in-one cartridge
The SmartPak® cartridge combines water pretreatment, reverse osmosis, synthetic activated carbon and ion exchange resins technologies to remove ions and particles to trace amounts. To reduce the level of organic impurities, the system configuration may include a 185/254 nm UV lamp as an option. When Direct-Q® is not in use, water automatically recirculates in the system to maintain high quality.
Optimization of the laboratory workplace
The compact Direct-Q® water purification system can be placed almost anywhere in the laboratory: under a desk, on a table or on a wall, allowing efficient use of space in the laboratory. The system does not require special installation and only requires connection to the water pipe and mains, as well as easy installation of the SmartPak® cartridge.
Convenient mobile sampling point
Designed to optimize space in the laboratory, the mobile remote water withdrawal point can be located at a distance of up to two meters from the body of the Direct-Q® water treatment system.
Intuitive graphical display
The key parameters of the system are displayed on the display, which makes it easy to monitor the basic quality parameters of purified water. The display rotates for easy viewing, regardless of the installation option of the system.
Available system configurations
The system can produce 3, 5 or 8 liters of treated type III water per hour, depending on the configuration, and more than 0.5 liters of ultrapure type I water per minute. The Direct-Q 3 system contains an internal tank that allows storing 6 litres of treated water of type III, while the configuration of the Direct-Q 5 and Direct-Q®®® 8 systems includes an external tank with a capacity of 30 or 60 litres.
| Available Direct-Q® configurations | |||
| System configuration options | Direct-Q® 3 | Direct-Q® 5 | Direct-Q® 8 |
| UV lamp 185/254 nm | Yes/No | Yes | Yes |
| Built-in 6-liter tank | Yes | No | No |
| Tank 30/60 liters | Option | Required | Required |
| Remote sampling point | Yes/No | Yes/No | Yes/No |
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Споживання | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Specifications of treated water system Direct-Q® | |
|
Specifications for ultrapure water type I |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT (with UV lamp/without UV lamp) | ≤5 ppb/≤10 ppb |
| Particles, size > 0.22 microns | <1 part/ml |
| Bacteria | <0.1 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <0.01 ng/ml |
| DNAase | <4 pg/ml |
| Specifications for treated water type III | |
| Ion removal | >96% |
| Organic removal | >99% |
| Removal of particles and bacteria | >99% |
| Direct-Q 3® performance | 3 l/hour |
| Direct-Q 5® performance | 5 l/h |
| Direct-Q 8® performance | 8 l/h |
| Technical specifications of Direct-Q® water treatment system | |
| Dimensions (HxWxD) | 54 x 29 x 38 cm |
| Net weight (Direct-Q® 3 system without UV 185/254 nm) | 8.1 kg |
| Net weight (Direct-Q® 3 system with 185/254 nm UV lamp) | 8.6 kg |
| Net weight (Direct-Q® 5/8 systems with 185/254 nm UV lamp) | 7.6 kg |
| Operating weight (Direct-Q® 3 system without UV lamp 185/254 nm) | 17.6 kg |
| Operating weight (Direct-Q® 3 system with 185/254 nm UV lamp) | 18.2 kg |
| Operating weight (Direct-Q® 5/8 systems with 185/254 nm UV lamp) | 12.2 kg |
| Net Weight (Remote Point of Sampling) | 2.15 kg |
| Weight in working condition (Remote point of sampling) | 2.68 kg |
| Built-in tank volume | 6 L |
| Electrical voltage | 100 – 250 V +/- 10% |
| Power frequency | 50 – 60 Hz +/- 10% |
| Connection type at the login | ½” Gaz M |
| Incoming water pressure | from 0.5 to 6 bar |
Consumables
| Consumables for the Direct-Q® system | |
| Cartridge water purification SmartPak® DQ3 | SPR00SIA1 |
| Cartridge water purification SmartPak® DQ8 | SPR08SIA1 |
| Vent filter for external tank | TANKMPK02 |
| Vent filter for internal tank | TANKMPK03 |
| UV lamp | SYN185UV1 |
|
Finish filters |
|
| Biopak® finishing filter | CDUFBI001 |
| Finishing filter EDS-Pak® | EDSPAK001 |
| Finishing filter LC-Pak® | LCPAK0001 |
| Finishing filter VOC-Pak® | V0CPAK001 |
| Finish filter Millipak® Express 20 | MPGP02001 |
|
Type III water conservation tanks |
|
| Tank volume volume 30 l | TANKPE030 |
| 60 l tank | TANKPE060 |
| Automatic sanitization module | SANIKIT01 |
