| Type of treated water | Type I water |
| System power supply | From pre-treated water |
| Type I water withdrawal rate | Up to 0,5 l/min |
| Productivity | Up to 5 l/day |
| Tank | Built-in tank volume of 2 liters. for filling with pre-treated water |
Highly efficient water treatment technologies
The Simplicity® system can produce ultratreated water from pretreated water of various quality, including distilled or deionized water. The high-performance SimpliPak® cartridge purifies water from contaminants to the trace amount. Additional options, such as a UV lamp and the Application Pak® finishing filter set, allow ultrapure water to be prepared specifically for a specific type of research.
Portability
The compact Simplicity® water treatment system is capable of producing ultra-pure water where it is needed at the moment. The system does not require special installation and is easy to install in the required place. To do this, you only need to connect the system to the mains and fill the tank with pre-treated water.
Built-in pre-treated water tank
Simplicity® systems have a built-in pretreated water tank that is easily removed from the system body for manual filling directly from the source of treated water.
Quality parameters control
Convenient display instantly displays the status and key parameters of the system, allowing you to easily monitor the quality of treated water and warning messages.
Ease and simplicity of maintenance
The SimpliPak® single-block cartridge is easily changed in just a few minutes. The Simplicity® system automatically notifies the user when the cartridge needs to be replaced.
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Споживання | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Specifications of Treated Water System Simplicity® | |
|
Specifications for ultrapure water type I |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT (with UV lamp/without UV lamp) | ≤5 ppb/≤15 ppb |
| Particles, size > 0.22 microns | <1 part/ml |
| Bacteria | <0.1 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <0.01 ng/ml |
| DNAase | <4 pg/ml |
| Water withdrawal rate | 0.5 l/min |
| Simplicity® Water Treatment System Technical Specifications | |
| Dimensions (HxWxD) | 51 x 29 x 36 cm |
| Net weight (Simplicity® system without UV 185/254 nm) | 4.9 kg |
| Net weight (Simplicity® system with 185/254 nm UV lamp) | 5.4 kg |
| Operating weight (Simplicity® system without 185/254 nm UV lamp) | 8.4 kg |
| Working weight (Simplicity® system with 185/254 nm UV lamp) | 9.0 kg |
| Built-in tank volume | 2 L |
| Electrical voltage | 100 – 250 V +/- 10% |
| Power frequency | 50 – 60 Hz +/- 10% |
Consumables
| Consumables for Simplicity® System | |
| Cartridge water treatment SimpliPak® 1 | SIPK0SIA1 |
| UV lamp | SYN185UV1 |
| Vent filter for the integrated tank | SLFH02510 |
|
Finish filters |
|
| Biopak® finishing filter | CDUFBI001 |
| Finishing filter EDS-Pak® | EDSPAK001 |
| Finishing filter LC-Pak® | LCPAK0001 |
| Finishing filter VOC-Pak® | V0CPAK001 |
| Finishing filter Simfilter 0.05 μm | SIMFILTER |
| Type of treated water | Type I water |
| System power supply | From pre-treated water |
| Type I water withdrawal rate | Up to 0,5 l/min |
| Productivity | Up to 5 l/day |
| Tank | Built-in tank volume of 2 liters. for filling with pre-treated water |
Highly efficient water treatment technologies
The Simplicity® system can produce ultratreated water from pretreated water of various quality, including distilled or deionized water. The high-performance SimpliPak® cartridge purifies water from contaminants to the trace amount. Additional options, such as a UV lamp and the Application Pak® finishing filter set, allow ultrapure water to be prepared specifically for a specific type of research.
Portability
The compact Simplicity® water treatment system is capable of producing ultra-pure water where it is needed at the moment. The system does not require special installation and is easy to install in the required place. To do this, you only need to connect the system to the mains and fill the tank with pre-treated water.
Built-in pre-treated water tank
Simplicity® systems have a built-in pretreated water tank that is easily removed from the system body for manual filling directly from the source of treated water.
Quality parameters control
Convenient display instantly displays the status and key parameters of the system, allowing you to easily monitor the quality of treated water and warning messages.
Ease and simplicity of maintenance
The SimpliPak® single-block cartridge is easily changed in just a few minutes. The Simplicity® system automatically notifies the user when the cartridge needs to be replaced.
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Споживання | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Specifications of Treated Water System Simplicity® | |
|
Specifications for ultrapure water type I |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT (with UV lamp/without UV lamp) | ≤5 ppb/≤15 ppb |
| Particles, size > 0.22 microns | <1 part/ml |
| Bacteria | <0.1 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <0.01 ng/ml |
| DNAase | <4 pg/ml |
| Water withdrawal rate | 0.5 l/min |
| Simplicity® Water Treatment System Technical Specifications | |
| Dimensions (HxWxD) | 51 x 29 x 36 cm |
| Net weight (Simplicity® system without UV 185/254 nm) | 4.9 kg |
| Net weight (Simplicity® system with 185/254 nm UV lamp) | 5.4 kg |
| Operating weight (Simplicity® system without 185/254 nm UV lamp) | 8.4 kg |
| Working weight (Simplicity® system with 185/254 nm UV lamp) | 9.0 kg |
| Built-in tank volume | 2 L |
| Electrical voltage | 100 – 250 V +/- 10% |
| Power frequency | 50 – 60 Hz +/- 10% |
Consumables
| Consumables for Simplicity® System | |
| Cartridge water treatment SimpliPak® 1 | SIPK0SIA1 |
| UV lamp | SYN185UV1 |
| Vent filter for the integrated tank | SLFH02510 |
|
Finish filters |
|
| Biopak® finishing filter | CDUFBI001 |
| Finishing filter EDS-Pak® | EDSPAK001 |
| Finishing filter LC-Pak® | LCPAK0001 |
| Finishing filter VOC-Pak® | V0CPAK001 |
| Finishing filter Simfilter 0.05 μm | SIMFILTER |
