| Type of treated water | CRLW, water for clinical laboratories |
| System power supply | Directly from the water supply system |
| Type II water withdrawal rate | Up to 2 l/min |
| Productivity | Up to 480 l/day |
Advanced water treatment technologies
AFS® treatment system technologies include pre-treatment, advanced reverse osmosis membrane, UV irradiation and 0.22 μm finishing filtration to produce treated water of reproducible quality in accordance with CLRW requirements. The high profitability of AFS® systems is achieved by optimizing the service life of pre- and finish-free cartridges and minimal water consumption.
Quality parameter monitoring
AFS® systems allow full control and automatic storage of data on the quality of treated water for 6 months. The manufacturer’s Millitrack® software makes data easier to access.
Minimal maintenance
The intuitive display facilitates system maintenance, and ergonomic cartridge mounts make it easy to replace them. Reduced maintenance reduces analyzer downtime.
Lab space optimization
AFS® systems have a small base area, so installation is possible where it is convenient: on a wall, on a table or under a table.
| Виробник | |
|---|---|
| Швидкість відбору води якості CRLW | |
| Споживання | |
| Управління системою |
Additional information
| Specifications of treated water by AFS® system | ||||
|
Specifications for treated water type III |
||||
| Resistivity | > 15 MОm.cm at 25°C | |||
| TOC, total organic carbon | < 30 μg/L | |||
| Bacteria | < 1 KOE/ml | |||
| Filtering | 0.22 μm | |||
| Soluble silicon | < 0.05 mg/L | |||
| AFS® 8 | AFS® 16 | AFS® 24 | ||
| Tank filling speed | 8 l/h | 16 l/h | 24 l/hour | |
| The speed of water supply to the analyzer | 2 l/min | |||
| Pressure at the inlet to the analyzer | Adjustable, from 0.9 to 3 bar | |||
| AFS® Water Treatment System Technical Specifications | |
| Voltage/frequency | 100-240 VA, 50/60 Hz |
| Power | 200 W |
| Weight in working condition | 28 kg |
| Package weight | 23.1 kg |
| Dimensions (HxWxD) | 585 x 268 x 426 mm |
Consumables
|
Consumables for the AFS® system |
|
| Millipak® 100 Filter | MPGL10ZW1 |
| Q-Gard® Water Purification Cartridge A | CP2ALLREST |
| Cartridge water purification Progard® TNP2 | PR0G0TNP2 |
| Cartridge water treatment BioPak® C | CDUFBC001 |
| Cartridge water purification Progard® TS2 | PR0G0T0S2 |
| Ventilation filter Millex-FH | SLFH02510 |
| Ventilation filter for external tank | TANKMPK01 |
| UV lamp | ZLXUVLPL1 |
| Tank for storage of purified water with volume of 30 l | TANKPE030 |
| Purified water storage tank with volume 60 l | TANKPE060 |
| Type of treated water | CRLW, water for clinical laboratories |
| System power supply | Directly from the water supply system |
| Type II water withdrawal rate | Up to 2 l/min |
| Productivity | Up to 480 l/day |
Advanced water treatment technologies
AFS® treatment system technologies include pre-treatment, advanced reverse osmosis membrane, UV irradiation and 0.22 μm finishing filtration to produce treated water of reproducible quality in accordance with CLRW requirements. The high profitability of AFS® systems is achieved by optimizing the service life of pre- and finish-free cartridges and minimal water consumption.
Quality parameter monitoring
AFS® systems allow full control and automatic storage of data on the quality of treated water for 6 months. The manufacturer’s Millitrack® software makes data easier to access.
Minimal maintenance
The intuitive display facilitates system maintenance, and ergonomic cartridge mounts make it easy to replace them. Reduced maintenance reduces analyzer downtime.
Lab space optimization
AFS® systems have a small base area, so installation is possible where it is convenient: on a wall, on a table or under a table.
| Виробник | |
|---|---|
| Швидкість відбору води якості CRLW | |
| Споживання | |
| Управління системою |
Additional information
| Specifications of treated water by AFS® system | ||||
|
Specifications for treated water type III |
||||
| Resistivity | > 15 MОm.cm at 25°C | |||
| TOC, total organic carbon | < 30 μg/L | |||
| Bacteria | < 1 KOE/ml | |||
| Filtering | 0.22 μm | |||
| Soluble silicon | < 0.05 mg/L | |||
| AFS® 8 | AFS® 16 | AFS® 24 | ||
| Tank filling speed | 8 l/h | 16 l/h | 24 l/hour | |
| The speed of water supply to the analyzer | 2 l/min | |||
| Pressure at the inlet to the analyzer | Adjustable, from 0.9 to 3 bar | |||
| AFS® Water Treatment System Technical Specifications | |
| Voltage/frequency | 100-240 VA, 50/60 Hz |
| Power | 200 W |
| Weight in working condition | 28 kg |
| Package weight | 23.1 kg |
| Dimensions (HxWxD) | 585 x 268 x 426 mm |
Consumables
|
Consumables for the AFS® system |
|
| Millipak® 100 Filter | MPGL10ZW1 |
| Q-Gard® Water Purification Cartridge A | CP2ALLREST |
| Cartridge water purification Progard® TNP2 | PR0G0TNP2 |
| Cartridge water treatment BioPak® C | CDUFBC001 |
| Cartridge water purification Progard® TS2 | PR0G0T0S2 |
| Ventilation filter Millex-FH | SLFH02510 |
| Ventilation filter for external tank | TANKMPK01 |
| UV lamp | ZLXUVLPL1 |
| Tank for storage of purified water with volume of 30 l | TANKPE030 |
| Purified water storage tank with volume 60 l | TANKPE060 |
