SKU L003016
- The evaporator, built-in refrigerator and storage tank are made of stainless steel, double walls of the housing are made of galvanized sheet steel, coated with powder paint
- Built-in distilled water storage tank with volume 24 l
- The condenser (cooling coil) inside the storage tank is easily replaceable.
- The evaporator is readily available for cleaning
- Automatic shutdown of heating and cooling water flow at full distillate tank or automatic filling of the tank after distillate removal controlled by electronic level detector
- Protection of the heating element from overheating when the water level in the distiller is insufficient
- Solenoid valve for water supply control
- Electronic detector of the degree of contamination of the stilling cube with distillation stop and visual instructions for cleaning
- Economical energy consumption by distilling heated cooling water
- Saving water thanks to automatic water shutdown. The consumption of excess water will be avoided
- CO2 degassing through the outlet in the condenser
- Distillate selection through a drain valve with a continuous and pressure position
- Possibility of wall and desktop installation
| Manufacturer | Lauda |
|---|---|
| Виробнича потужність, л/год | |
| Контактний матеріал | |
| Резервуар для накопичення продукту |
Specifications
| Productivity | 12 l/h |
| Tank volume | 24 L |
| Conductivity degree at 25 °C | 2.3 μS/cm |
| Heater power max. | 9 kWt |
| Cooling water consumption | 3,3 l/min |
| Mine cooling water pressure difference. | 3 bar |
| Maximum cooling water pressure | 7 bar |
| Water cooling inlet for hose | 1/2″ |
| Water cooling drain for hose | 3/4″ |
| External dimensions (w/d/h) | 780/410/670 mm |
| Weight | 40 kg |
| Ambient temperature | 10 … 40 °C |
| Network requirements | 400V~3Phase, 50/60Hz |
| Power plug | Power cord with plug (IEC 60309, 5 pole, CEE, red, 16A) |
- The evaporator, built-in refrigerator and storage tank are made of stainless steel, double walls of the housing are made of galvanized sheet steel, coated with powder paint
- Built-in distilled water storage tank with volume 24 l
- The condenser (cooling coil) inside the storage tank is easily replaceable.
- The evaporator is readily available for cleaning
- Automatic shutdown of heating and cooling water flow at full distillate tank or automatic filling of the tank after distillate removal controlled by electronic level detector
- Protection of the heating element from overheating when the water level in the distiller is insufficient
- Solenoid valve for water supply control
- Electronic detector of the degree of contamination of the stilling cube with distillation stop and visual instructions for cleaning
- Economical energy consumption by distilling heated cooling water
- Saving water thanks to automatic water shutdown. The consumption of excess water will be avoided
- CO2 degassing through the outlet in the condenser
- Distillate selection through a drain valve with a continuous and pressure position
- Possibility of wall and desktop installation
| Manufacturer | Lauda |
|---|---|
| Виробнича потужність, л/год | |
| Контактний матеріал | |
| Резервуар для накопичення продукту |
Specifications
| Productivity | 12 l/h |
| Tank volume | 24 L |
| Conductivity degree at 25 °C | 2.3 μS/cm |
| Heater power max. | 9 kWt |
| Cooling water consumption | 3,3 l/min |
| Mine cooling water pressure difference. | 3 bar |
| Maximum cooling water pressure | 7 bar |
| Water cooling inlet for hose | 1/2″ |
| Water cooling drain for hose | 3/4″ |
| External dimensions (w/d/h) | 780/410/670 mm |
| Weight | 40 kg |
| Ambient temperature | 10 … 40 °C |
| Network requirements | 400V~3Phase, 50/60Hz |
| Power plug | Power cord with plug (IEC 60309, 5 pole, CEE, red, 16A) |
SKU L003016
