SKU L003012
SKU L003012
- Heating element, evaporator and condenser stainless steel
- The evaporator is easily accessible for cleaning
- Galvanized sheet steel body coated with powder paint
- Suitable for stand mounting
- Protection of the heating element from anhydrous heating
- Cooling water flow regulator tap, the possibility of constant measurement of the cooling water temperature (thermometer)
- Destillate selection through the outlet on the capacitor
- Economical energy consumption by distilling heated cooling water
- CO2 degassing through the outlet in the condenser
| Виробник | Lauda |
|---|---|
| Виробнича потужність, л/год | |
| Контактний матеріал | |
| Резервуар для накопичення продукту |
Specifications
| Productivity | 4 l/hour |
| Conductivity degree at 25 °C | 2.3 μS/cm |
| Heater power max. | 3 kWt |
| Cooling water consumption | 0,67 l/min |
| Mine cooling water pressure difference. | 1 bar |
| Maximum cooling water pressure | 2 bar |
| Water cooling inlet for hose | 1/2″ |
| Water cooling drain for hose | 1/2″ |
| External dimensions (w/d/h) | 280/250/490 mm |
| Weight | 8 kg |
| Ambient temperature | 10 … 40 °C |
| Network requirements | 230V~, 50/60Hz |
| Power plug | Power cord with angle plug (CEE7/7) |
- Heating element, evaporator and condenser stainless steel
- The evaporator is easily accessible for cleaning
- Galvanized sheet steel body coated with powder paint
- Suitable for stand mounting
- Protection of the heating element from anhydrous heating
- Cooling water flow regulator tap, the possibility of constant measurement of the cooling water temperature (thermometer)
- Destillate selection through the outlet on the capacitor
- Economical energy consumption by distilling heated cooling water
- CO2 degassing through the outlet in the condenser
| Виробник | Lauda |
|---|---|
| Виробнича потужність, л/год | |
| Контактний матеріал | |
| Резервуар для накопичення продукту |
Specifications
| Productivity | 4 l/hour |
| Conductivity degree at 25 °C | 2.3 μS/cm |
| Heater power max. | 3 kWt |
| Cooling water consumption | 0,67 l/min |
| Mine cooling water pressure difference. | 1 bar |
| Maximum cooling water pressure | 2 bar |
| Water cooling inlet for hose | 1/2″ |
| Water cooling drain for hose | 1/2″ |
| External dimensions (w/d/h) | 280/250/490 mm |
| Weight | 8 kg |
| Ambient temperature | 10 … 40 °C |
| Network requirements | 230V~, 50/60Hz |
| Power plug | Power cord with angle plug (CEE7/7) |






