SKU 1.09327.0001
In fact, it is the only compressed gas sampler intended for use in explosive zone level 2. Using two sensors (one to measure mass flow and the other to measure pressure), the device allows sampling gas under pressure. The unique MAS-100 CG Ex® system makes compressed gas sampling safe, easy and accurate.
Safe and reliable:
- Takes gas samples under pressure; After sampling, gradual decompression occurs, which prevents possible damage to microorganisms.
- Sampling at two different flow rates: can be used for low pressure applications.
Advantages:
- Factory calibration only: reduces the risk of errors.
- Unique flow sensor technology: no manual setup is required for different types of gas after gas selection.
- The automated sampling process saves you time.
- Preprogrammed for a number of different gases: no further calculations are required.
- It can store up to 10 gas extraction protocols.
Specifications
| Height | 32.5 sm | ||
| Length | 37.0 cm | ||
| Width | 11.0 cm | ||
| Mass | 10 kg without sampling head | ||
| Material. | Aluminum | ||
| Rated flow rate | 100 l/min. ±5.0% (by pressure range) from 1.5 bar to 10 bar (absolute) or 50 l/min. ±5.0% in the pressure range from 1.5 bar to 10 bar (absolute) | ||
| Standard sample volumes | 50, 100, 250, 500, 1000 l | ||
| Available sample volumes | From 1 to 2000 liters, volumes can be selected from 0 to 2000 liters | ||
| Pre-programmed gas types | Air, nitrogen, carbon dioxide, argon | ||
| Rechargeable battery | 20 elements NiMH, 3800mAh, voltage 24 V | ||
| Charger | 110-240V, 50-60Hz | ||
| Display. | Alphanumeric LCD display, 32 characters | ||
| RTC battery | service life approx. 10 years | ||
| Gas regulation | Mass flowmeter and pressure sensor 0-10bar and proportional valve | ||
| Service maintenance | Full service support during the warranty and post-warranty period of operation by a certified service engineer in Ukraine (availability of an official, valid certificate from the manufacturer) | ||
Sampling head
| Height | 16.0 cm |
| Diameter | 10.0 cm |
| Mass | 1.5 kg |
| Material. | Anodized aluminum, stainless steel clamps |
| Autoclaving conditions | 20 minutes at 121°C |
| Tube | Length, 1.5 m ID=10 mm OD=19 mm,
sterilize for 20 minutes at 121°C |
| Quick Connections Material | Chrome brass |
In fact, it is the only compressed gas sampler intended for use in explosive zone level 2. Using two sensors (one to measure mass flow and the other to measure pressure), the device allows sampling gas under pressure. The unique MAS-100 CG Ex® system makes compressed gas sampling safe, easy and accurate.
Safe and reliable:
- Takes gas samples under pressure; After sampling, gradual decompression occurs, which prevents possible damage to microorganisms.
- Sampling at two different flow rates: can be used for low pressure applications.
Advantages:
- Factory calibration only: reduces the risk of errors.
- Unique flow sensor technology: no manual setup is required for different types of gas after gas selection.
- The automated sampling process saves you time.
- Preprogrammed for a number of different gases: no further calculations are required.
- It can store up to 10 gas extraction protocols.
Specifications
| Height | 32.5 sm | ||
| Length | 37.0 cm | ||
| Width | 11.0 cm | ||
| Mass | 10 kg without sampling head | ||
| Material. | Aluminum | ||
| Rated flow rate | 100 l/min. ±5.0% (by pressure range) from 1.5 bar to 10 bar (absolute) or 50 l/min. ±5.0% in the pressure range from 1.5 bar to 10 bar (absolute) | ||
| Standard sample volumes | 50, 100, 250, 500, 1000 l | ||
| Available sample volumes | From 1 to 2000 liters, volumes can be selected from 0 to 2000 liters | ||
| Pre-programmed gas types | Air, nitrogen, carbon dioxide, argon | ||
| Rechargeable battery | 20 elements NiMH, 3800mAh, voltage 24 V | ||
| Charger | 110-240V, 50-60Hz | ||
| Display. | Alphanumeric LCD display, 32 characters | ||
| RTC battery | service life approx. 10 years | ||
| Gas regulation | Mass flowmeter and pressure sensor 0-10bar and proportional valve | ||
| Service maintenance | Full service support during the warranty and post-warranty period of operation by a certified service engineer in Ukraine (availability of an official, valid certificate from the manufacturer) | ||
Sampling head
| Height | 16.0 cm |
| Diameter | 10.0 cm |
| Mass | 1.5 kg |
| Material. | Anodized aluminum, stainless steel clamps |
| Autoclaving conditions | 20 minutes at 121°C |
| Tube | Length, 1.5 m ID=10 mm OD=19 mm,
sterilize for 20 minutes at 121°C |
| Quick Connections Material | Chrome brass |
SKU 1.09327.0001MERCK
