alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

ALSI » Products. » Equipment » Heating/cooling/sterilization » Incubators » CO2 incubator CelCulture CCL-170B-8-HHS, volume 170, l with high temperature sterilization

CO2 incubator CelCulture CCL-170B-8-HHS, volume 170, l with high temperature sterilization

SKU 2170295CCL-170B-8-HH
SKU 2170295CCL-170B-8-HH

Information about the status of the main parameters is displayed on the dashboard equipped with PID SmartSense™ microprocessor, which, in turn, will allow you to customize the operation of the equipment according to your needs. Uniform heating and temperature uniformity are possible thanks to a successful combination of the VentiFlow™ ventilation system and the technology of direct heating of the chamber through the air casing. The safety of the biomaterial, in particular, will be taken care of by the complex of disinfecting procedures ROBUST™ at an elevated temperature of 180°C, as well as the Isocide™ coating, which prevents the development of bacteria on the surface of the device. The quality of production and materials from ESCO will be the key to success in your research.

Виробник

ESCO

Тип обладнання

CO2 incubators

Серія

CelCulture®

Діапазон температур, ⁰С

25… 50(60)°С

Контроль кисню

No

CO2 датчик із можливістю стерилізації

Yes

Стерилізація

+180

Дисплей

Fluorescent Digital

ULPA фільтр

Yes

Робочий об'єм камери

Additional information

Important benefits of the CelCulture® CCL-B-HHS series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • High-temperature sterilization with hot air at 180°C;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless stainless steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

 

Materials for download

    Information about the status of the main parameters is displayed on the dashboard equipped with PID SmartSense™ microprocessor, which, in turn, will allow you to customize the operation of the equipment according to your needs. Uniform heating and temperature uniformity are possible thanks to a successful combination of the VentiFlow™ ventilation system and the technology of direct heating of the chamber through the air casing. The safety of the biomaterial, in particular, will be taken care of by the complex of disinfecting procedures ROBUST™ at an elevated temperature of 180°C, as well as the Isocide™ coating, which prevents the development of bacteria on the surface of the device. The quality of production and materials from ESCO will be the key to success in your research.

    Виробник

    ESCO

    Тип обладнання

    CO2 incubators

    Серія

    CelCulture®

    Діапазон температур, ⁰С

    25… 50(60)°С

    Контроль кисню

    No

    CO2 датчик із можливістю стерилізації

    Yes

    Стерилізація

    +180

    Дисплей

    Fluorescent Digital

    ULPA фільтр

    Yes

    Робочий об'єм камери

    Additional information

    Important benefits of the CelCulture® CCL-B-HHS series:

    • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
    • Temperature range: ambient temperature from +7°C to +60°C;
    • High-temperature sterilization with hot air at 180°C;
    • Any gas entering the chamber passes through ultra-fine filters (ULPA);
    • Precision sensor with infrared technology for CO2 control;
    • Seamless stainless steel chamber design;
    • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
    • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
    • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
    • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
    • Diagnostic system for comprehensive analysis of device operation;
    • Remote control of equipment operation using Voyager® technology;
    • Record measurement data that can be read in an open format via RS485 interface.

     

    Materials for download

      Рекомендовані товари