-
The Avantgarde.Line line, and in particular theheating chamber FD-720 with a volume of 741 liters, is a high-tech equipment designed for drying and sterilizing large volumes of dishes as well as samples. -
The heating chamber FD-S 115, volume 106 liters, of the S-Solid.Line line is effectively used in studies where quality control is necessary. -
The equipment of the Avantgarde.Line line is perfect for efficient drying and sterilization. The heating chamber FED-115, with a volume of 116 liters, is equipped with an advanced timer and controller with advanced programming functions. -
The FED-400 drying cabinet from the Classic.Line line has a volume of 400 liters, which makes it a universal choice for drying and sterilization. -
The heating chamber FED-56 from the Avantgarde.Line range, with a volume of 60 liters, will cope with the routine drying and sterilization processes quickly and efficiently. Optimized energy efficiency combined with mechanical convection will save precious resources during operation. -
Drying and sterilization are routine procedures that are encountered daily in all laboratories. With the FED-720 Avantgarde.Line heating chamber, you will be able to perform the above-mentioned processes quickly and efficiently. -
The 115 liter FP-115 test chamber from the Classic.Line series is an advanced solution when strict control and precise conditions are required. The heating rate is regulated and carried out by forced convection. -
A large number of material testing equipment is known, but the BINDER FP-240 from the Classic.Line series definitely wins this race. The quality of production and materials guarantees durability, and the available technologies will quickly prove their effectiveness. -
Among the wide variety of material testing equipment, the FP-400 camera from the Classic.Line series takes pride of place due to the accuracy and reliability of BINDER. The device will amaze you with its functionality and help overcome any difficulties in creating high-temperature conditions. -
The FP-53 is a material testing camera for the Classic.Line that will help in reproducing the required conditions. The working volume is 50 liters and is best suited for working with a small number of samples. -
The FP-720 test chamber from the Classic.Line series will perfectly cope with modeling the necessary conditions for studying various properties of materials. The large volume of 720 liters will allow you to work with a large number of samples, which, combined with the possibility of programming the device, will take your research to a new level. -
OFA-110 is a highly efficient equipment for quick drying or sterilization of specimens and utensils in your laboratory. It is known that these procedures are routine, so great attention should be paid to the quality of materials, safety and comfort from use. ESCO will provide your research with everything you need and guarantee the durability of the devices presented. -
The OFA-170 forced convection drying cabinet will help you perform any drying or sterilization procedures quickly and efficiently. Unsurpassed quality from ESCO will guarantee the durability and reliability of the device, while modern functions will make your work more productive.
-
It is known that drying cabinets and heating chambers must meet strict standards of reliability and safety, because this equipment is regularly exposed to high-temperature exposure. OFA-240 is a versatile device for efficient drying and sterilization of specimens in your laboratory. Excellent quality from ESCO will eliminate the risk of depressurization and premature damage.
-
ESCO OFA-32, with a volume of 32 liters, is excellent for quick drying and sterilization of small quantities of samples. The device is equipped with mechanical convection and other advanced technologies that will ensure the efficiency of your work. In particular, the quality of production and materials will make the operation process safe.
-
The OFA-54 drying cabinet with a volume of 54 liters will allow creating high-temperature conditions quickly and efficiently thanks to modern equipment and useful functions from ESCO.
-
The drying cabinet FD-S 56 from the S-Solid.Line line, with a volume of 55 liters, will perfectly cope with drying dishes, samples and their long-term storage at elevated temperatures. -
The Avantgarde.Line range and the FED-260 heating chamber, in particular, are the universal choice for drying and sterilization. The large volume of 259 liters makes it possible to use this equipment for a large number of dishes and samples, which, combined with increased energy efficiency, will make your work more productive. -
Single-position evaporative water bath for soft evaporation from Erlenmeyer flasks, chemical cups, etc. A multicomponent set of rings made of heat-resistant plastic allows you to choose the optimal diameter of the bath opening. For stable operation without overheating, the water bath is equipped with temperature and water level regulators. -
Easy to operate water bath up to 16 liters. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms. -
Easy to operate water bath up to 22 liters. The design feature of the water bath H22 is a greater working depth compared to models of similar volume. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy to operate water bath up to 24 liters. The design feature of the water bath H24 is a larger area of the working hole compared to models of similar volume. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy to operate and compact water bath up to 4 liters, which allows you to maintain the temperature from about + 5 ° C relative to the environment and up to a boil with an accuracy of 0.1 K. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy-to-operate water bath up to 41 liters allows you to process a large number of samples or work with samples of large volumes. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
“ALSI” LTD, Equipment and reagents of modern laboratories
“ALSI” LTD, Equipment and reagents of modern laboratories
CATEGORIES
ADDRESS
- Kyiv
LLC “ALSI” LTD, str. Shovkunenko, 8/20, office 51, Kyiv, Ukraine, 03049 - Kharkiv
Regional office
“ALSI” LTD, str. 14, Poltavsky Shlyach, office. 34, Kharkiv, Ukraine, 61052
(044) 520-05-05
© Copyright 1996 – 2024 “ALSI” LLC | All rights reserved