-
Manual fiber analysis system with innovative FibreBag technology. Based on a six-seater heater. Allows you to process 36 samples simultaneously. -
-
-
-
Reciprocating water bath shaker for precise temperature maintenance combined with sample mixing. The shaking mechanism starts smoothly, thanks to corrosion-resistant special ball bearings, stable operation of the shaker is ensured. The ability to connect to the water supply system or standard circulation coolers allows you to expand the temperature range of water baths to +10 °C. The inside of the bathtub, lid, shaker and heating element are made of stainless steel. A lid, perforated pallet and cooling coil are standard. -
The ultra-low temperature freezer UF V-500-W will take care of compliance with all necessary rules and regulations when storing valuable samples in your laboratory. Thus, a universal volume of 477 liters and an installed water cooling system will significantly increase the energy efficiency of work, while vacuum panel cladding will ensure tightness of the reproducible conditions. The device is also equipped with R290/R170 refrigerants, which are environmentally friendly and environmentally friendly. -
For long-term storage of valuable biomaterial, vaccines, samples and reagents, special equipment has been used for a long time – ultra-low temperature freezers. UF V-700-W, with a volume of 700 liters, will cope with all the tasks in your laboratory. Thus, the device is equipped with a water cooling system, which will reduce energy consumption costs due to more efficient heat dissipation. Sheathing with vacuum panels will ensure the stability of the conditions inside, and take care of their tightness. -
Easy-to-operate water bath up to 8 liters, equipped with a TFT display, which provides a clear display of all process data. To improve the spatial stability of temperature, the water bath is equipped with an integrated circulation system. It has three modes of timer operation and electronic control of the thermostat. The inside of the bathtub, lid, sieve and heating element are made of stainless steel. A lid and perforated pallet are standard. -
Easy-to-operate water bath up to 16 liters, equipped with a TFT display that provides a clear display of all process data. To improve the spatial stability of temperature, the water bath is equipped with an integrated circulation system. It has three modes of timer operation and electronic control of the thermostat. The inside of the bathtub, lid, sieve and heating element are made of stainless steel. A lid and perforated pallet are standard.
-
Reciprocating water bath shaker for precise temperature maintenance combined with sample mixing. The shaking mechanism starts smoothly, thanks to corrosion-resistant special ball bearings, stable operation of the shaker is ensured. The inside of the bathtub, lid, shaker and heating element are made of stainless steel. A lid and perforated pallet are standard.
-
Water bath shaker with orbital motion for precise temperature maintenance combined with mixing samples. The shaking mechanism starts smoothly, thanks to corrosion-resistant special ball bearings, stable operation of the shaker is ensured. The ability to connect to the water supply system or standard circulation coolers allows you to expand the temperature range of water baths to +10 °C. The inside of the bathtub, lid, shaker and heating element are made of stainless steel. A lid, perforated pallet and cooling coil are standard.
-
Easy-to-operate water bath up to 8 liters, which allows you to maintain the temperature from about + 5 ° C relative to the environment and up to a boil with an accuracy of 0.1 K. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy-to-operate water bath up to 41 liters allows you to process a large number of samples or work with samples of large volumes. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy to operate and compact water bath up to 4 liters, which allows you to maintain the temperature from about + 5 ° C relative to the environment and up to a boil with an accuracy of 0.1 K. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy to operate water bath up to 24 liters. The design feature of the water bath H24 is a larger area of the working hole compared to models of similar volume. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy to operate water bath up to 22 liters. The design feature of the water bath H22 is a greater working depth compared to models of similar volume. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Easy to operate water bath up to 16 liters. To control the operating time, it has three timer programming modes. The model is equipped with a TFT display, which provides a clear display of all process data. The inside of the bathtub, lid, pallet and heating element are made of stainless steel. The bath tank is equipped with a drain valve. Safety against overheating or temperature deviation is provided by an electronic thermostat, as well as optical and acoustic alarms.
-
Single-position evaporative water bath for soft evaporation from Erlenmeyer flasks, chemical cups, etc. A multicomponent set of rings made of heat-resistant plastic allows you to choose the optimal diameter of the bath opening. For stable operation without overheating, the water bath is equipped with temperature and water level regulators. -
The Avantgarde.Line range and the FED-260 heating chamber, in particular, are the universal choice for drying and sterilization. The large volume of 259 liters makes it possible to use this equipment for a large number of dishes and samples, which, combined with increased energy efficiency, will make your work more productive. -
The drying cabinet FD-S 56 from the S-Solid.Line line, with a volume of 55 liters, will perfectly cope with drying dishes, samples and their long-term storage at elevated temperatures. -
The OFA-54 drying cabinet with a volume of 54 liters will allow creating high-temperature conditions quickly and efficiently thanks to modern equipment and useful functions from ESCO. -
ESCO OFA-32, with a volume of 32 liters, is excellent for quick drying and sterilization of small quantities of samples. The device is equipped with mechanical convection and other advanced technologies that will ensure the efficiency of your work. In particular, the quality of production and materials will make the operation process safe.
-
It is known that drying cabinets and heating chambers must meet strict standards of reliability and safety, because this equipment is regularly exposed to high-temperature exposure. OFA-240 is a versatile device for efficient drying and sterilization of specimens in your laboratory. Excellent quality from ESCO will eliminate the risk of depressurization and premature damage.
-
The OFA-170 forced convection drying cabinet will help you perform any drying or sterilization procedures quickly and efficiently. Unsurpassed quality from ESCO will guarantee the durability and reliability of the device, while modern functions will make your work more productive.
“ALSI” LTD, Equipment and reagents of modern laboratories
“ALSI” LTD, Equipment and reagents of modern laboratories
CATEGORIES
ADDRESS
- Kyiv
LLC “ALSI” LTD, str. Shovkunenko, 8/20, office 51, Kyiv, Ukraine, 03049 - Kharkiv
Regional office
“ALSI” LTD, str. 14, Poltavsky Shlyach, office. 34, Kharkiv, Ukraine, 61052
(044) 520-05-05
© Copyright 1996 – 2024 “ALSI” LLC | All rights reserved