SKU L003013
- The evaporator, built-in refrigerator and storage tank are made of stainless steel, double walls of the housing are made of galvanized sheet steel, coated with powder paint.
- The built-in distillate storage tank holds double hourly distillation volume
- The condenser (cooling coil) inside the storage tank is easily replaceable.
- The evaporator is readily available for cleaning.
- Automatic shutdown of heating and cooling water flow at full distillate tank or automatic filling of the tank after distillate removal, which are controlled by an electronic level detector.
- Protection of the heating element from overheating when the water level in the distiller is insufficient.
- Solenoid valve for water supply control
- Electronic detector of the degree of contamination of the stilling cube with distillation stop and visual instructions for cleaning.
- Economical energy consumption by distilling heated cooling water.
- Saving water thanks to automatic water shutdown. The consumption of excess water will be avoided.
- Degassing of CO2 through the outlet in the condenser.
- Distillate selection through a drain valve with a continuous and pressure position.
- Suitable for both desktop and wall mounting
| Manufacturer | Lauda |
|---|---|
| Виробнича потужність, л/год | |
| Контактний матеріал | |
| Резервуар для накопичення продукту |
Specifications
| Productivity | 2 l/hour |
| Tank volume | 4 L |
| Conductivity degree at 25 °C | 2.3 μS/cm |
| Heater power max. | 1,5 kWt |
| Cooling water consumption | 0,5 l/min |
| Mine cooling water pressure difference. | 3 bar |
| Maximum cooling water pressure | 7 bar |
| Water cooling inlet for hose | 1/2″ |
| Water cooling drain for hose | 3/4″ |
| External dimensions (w/d/h) | 540/290/420 mm |
| Weight | 16 kg |
| Ambient temperature | 10 … 40 °C |
| Network requirements | 230V~, 50/60Hz |
| Power plug | Power cord with angle plug (CEE7/7) |
- The evaporator, built-in refrigerator and storage tank are made of stainless steel, double walls of the housing are made of galvanized sheet steel, coated with powder paint.
- The built-in distillate storage tank holds double hourly distillation volume
- The condenser (cooling coil) inside the storage tank is easily replaceable.
- The evaporator is readily available for cleaning.
- Automatic shutdown of heating and cooling water flow at full distillate tank or automatic filling of the tank after distillate removal, which are controlled by an electronic level detector.
- Protection of the heating element from overheating when the water level in the distiller is insufficient.
- Solenoid valve for water supply control
- Electronic detector of the degree of contamination of the stilling cube with distillation stop and visual instructions for cleaning.
- Economical energy consumption by distilling heated cooling water.
- Saving water thanks to automatic water shutdown. The consumption of excess water will be avoided.
- Degassing of CO2 through the outlet in the condenser.
- Distillate selection through a drain valve with a continuous and pressure position.
- Suitable for both desktop and wall mounting
| Manufacturer | Lauda |
|---|---|
| Виробнича потужність, л/год | |
| Контактний матеріал | |
| Резервуар для накопичення продукту |
Specifications
| Productivity | 2 l/hour |
| Tank volume | 4 L |
| Conductivity degree at 25 °C | 2.3 μS/cm |
| Heater power max. | 1,5 kWt |
| Cooling water consumption | 0,5 l/min |
| Mine cooling water pressure difference. | 3 bar |
| Maximum cooling water pressure | 7 bar |
| Water cooling inlet for hose | 1/2″ |
| Water cooling drain for hose | 3/4″ |
| External dimensions (w/d/h) | 540/290/420 mm |
| Weight | 16 kg |
| Ambient temperature | 10 … 40 °C |
| Network requirements | 230V~, 50/60Hz |
| Power plug | Power cord with angle plug (CEE7/7) |
SKU L003013
