Automatic distiller PD 8 R, manufactured by LAUDA-GFL (Germany)

SKU L003015

The evaporator, built-in refrigerator and storage tank are made of stainless steel, double walls of the housing are made of galvanized sheet steel, coated with powder paint
Built-in distilled water storage tank with volume 16 l
Capacitor (cooling coil) inside the storage tank, easily replaceable
The evaporator is readily available for cleaning
Automatic shutdown of heating and cooling water flow at full distillate tank or automatic filling of the tank after distillate removal controlled by electronic level detector
Protection of the heating element from overheating when the water level in the distiller is insufficient
Solenoid valve for water supply control
Electronic detector of the degree of contamination of the stilling cube with distillation stop and visual instructions for cleaning
Economical energy consumption by distilling heated cooling water
Saving water thanks to automatic water shutdown. The consumption of excess water will be avoided
CO2 degassing through the outlet in the condenser
Distillate selection through a drain valve with a continuous and pressure position
Possibility of wall and desktop installation

Manufacturer	Lauda
Виробнича потужність, л/год
Контактний матеріал
Резервуар для накопичення продукту

Specifications

Productivity	8 l/h
Tank volume	16 L
Conductivity degree at 25 °C	2.3 μS/cm
Heater power max.	6 kWt
Cooling water consumption	1,2 l/min
Mine cooling water pressure difference.	3 bar
Maximum cooling water pressure	7 bar
Water cooling inlet for hose	1/2″
Water cooling drain for hose	3/4″
External dimensions (w/d/h)	780/410/540 mm
Weight	34 kg
Ambient temperature	10 … 40 °C
Network requirements	400V~3Phase, 50/60Hz
Power plug	Power cord with plug (IEC 60309, 5 pole, CEE, red, 16A)

The evaporator, built-in refrigerator and storage tank are made of stainless steel, double walls of the housing are made of galvanized sheet steel, coated with powder paint
Built-in distilled water storage tank with volume 16 l
Capacitor (cooling coil) inside the storage tank, easily replaceable
The evaporator is readily available for cleaning
Automatic shutdown of heating and cooling water flow at full distillate tank or automatic filling of the tank after distillate removal controlled by electronic level detector
Protection of the heating element from overheating when the water level in the distiller is insufficient
Solenoid valve for water supply control
Electronic detector of the degree of contamination of the stilling cube with distillation stop and visual instructions for cleaning
Economical energy consumption by distilling heated cooling water
Saving water thanks to automatic water shutdown. The consumption of excess water will be avoided
CO2 degassing through the outlet in the condenser
Distillate selection through a drain valve with a continuous and pressure position
Possibility of wall and desktop installation

Manufacturer	Lauda
Виробнича потужність, л/год
Контактний матеріал
Резервуар для накопичення продукту

Productivity	8 l/h
Tank volume	16 L
Conductivity degree at 25 °C	2.3 μS/cm
Heater power max.	6 kWt
Cooling water consumption	1,2 l/min
Mine cooling water pressure difference.	3 bar
Maximum cooling water pressure	7 bar
Water cooling inlet for hose	1/2″
Water cooling drain for hose	3/4″
External dimensions (w/d/h)	780/410/540 mm
Weight	34 kg
Ambient temperature	10 … 40 °C
Network requirements	400V~3Phase, 50/60Hz
Power plug	Power cord with plug (IEC 60309, 5 pole, CEE, red, 16A)

SKU L003015