Замовити Test chamber with variable climatic conditions MKFT 240, Binder (Germany) • АЛСІ

SKU 9020-0383

There is no need to spend extra time collecting data, because the APT-COM™ software package will make this process quick and extremely convenient. A touch controller with multiple operating modes, in particular, will help in efficient use of the device. Exceptional quality of production and materials from BINDER guarantee tightness, and APT.line™ technology ensures uniformity of temperature inside the chamber. A wide range of useful options and accessories will make it easy to create challenging conditions for your studies.

Manufacturer	Binder
Моделювання умов
Температурний режим
Контроль вологості
Освітлення
Temperature range, ⁰С
Діапазон вологості
Об'єм, л

Additional information

Important characteristics of the MKFT series:

Temperature range: from -70°C to +180°C;

Humidity range: from 10% to 98% vidn. vol.;

Built-in backup tank for water storage, 20 l;

APT.line™ preheating technology;

4 potential relay contacts;

Device for protection of samples from fogging, with the possibility of programming for accurate testing of materials;

Humidification is regulated by a capacitive sensor and steam humidification;

Heated viewing window with LED camera lighting;

Advanced programming capabilities with the help of a convenient controller with a touch screen will allow you to put the device offline, as well as control the conditions inside;

Standard package of special software from BINDER APT-COM;™

Recording measurement data using the built-in recorder. Data can be read in an open format via USB port;

Error diagnostics system with visual and audible alarm notification;

The inner chamber is made of stainless steel;

1 lattice shelf made of stainless steel;

Access port with silicone plugs, 50 mm in diameter, on the left (for models 115 and 240);

Built-in overheat protection device, class 2 (DIN 12880) with visual and audible alarm;

4 reliable double guide castors, 2 with handbrake;

Ethernet interface;

Alert in case of lack of water in the tank with fresh water;

Safe drainage and supply of water up to 1 meter in height thanks to a connecting set;

Door heating;

The tilt angle can also be adjusted;

Clock for counting the current time;

Chlorofluorocarbon-free refrigerants R-23 and R-452A;

Cooling is carried out using a special compression refrigeration machine.

Materials for download

Accurate reproduction of dynamic microclimate over time, Cyclic Temperature Tests, Electronics & Electrical Engineering, Material Testing, Materials Aging Research, Semiconductor manufacturing, Stress Material Tests, Temperature and climatic tests in extreme conditions

There is no need to spend extra time collecting data, because the APT-COM™ software package will make this process quick and extremely convenient. A touch controller with multiple operating modes, in particular, will help in efficient use of the device. Exceptional quality of production and materials from BINDER guarantee tightness, and APT.line™ technology ensures uniformity of temperature inside the chamber. A wide range of useful options and accessories will make it easy to create challenging conditions for your studies.

Manufacturer	Binder
Моделювання умов
Температурний режим
Контроль вологості
Освітлення
Temperature range, ⁰С
Діапазон вологості
Об'єм, л

Additional information

Important characteristics of the MKFT series:

Temperature range: from -70°C to +180°C;

Humidity range: from 10% to 98% vidn. vol.;

Built-in backup tank for water storage, 20 l;

APT.line™ preheating technology;

4 potential relay contacts;

Device for protection of samples from fogging, with the possibility of programming for accurate testing of materials;

Humidification is regulated by a capacitive sensor and steam humidification;

Heated viewing window with LED camera lighting;

Advanced programming capabilities with the help of a convenient controller with a touch screen will allow you to put the device offline, as well as control the conditions inside;

Standard package of special software from BINDER APT-COM;™

Recording measurement data using the built-in recorder. Data can be read in an open format via USB port;

Error diagnostics system with visual and audible alarm notification;

The inner chamber is made of stainless steel;

1 lattice shelf made of stainless steel;

Access port with silicone plugs, 50 mm in diameter, on the left (for models 115 and 240);

Built-in overheat protection device, class 2 (DIN 12880) with visual and audible alarm;

4 reliable double guide castors, 2 with handbrake;

Ethernet interface;

Alert in case of lack of water in the tank with fresh water;

Safe drainage and supply of water up to 1 meter in height thanks to a connecting set;

Door heating;

The tilt angle can also be adjusted;

Clock for counting the current time;

Chlorofluorocarbon-free refrigerants R-23 and R-452A;

Cooling is carried out using a special compression refrigeration machine.

Materials for download

SKU 9020-0383Accurate reproduction of dynamic microclimate over time, Cyclic Temperature Tests, Electronics & Electrical Engineering, Material Testing, Materials Aging Research, Semiconductor manufacturing, Stress Material Tests, Temperature and climatic tests in extreme conditions

Test chamber with variable climatic conditions MKFT 240, Binder (Germany)

Additional information

Materials for download

Additional information

Materials for download

Recommended products

Climatic chamber MK 115, Binder (Germany) with heating / cooling function

Climatic chamber KBFS ECO 1020-230V, Binder (Germany)

Test chamber with variable climatic conditions MKFT115, Binder (Germany)

Climatic chamber MKF1020-400V, manufactured by BINDER (Germany)