Climatic chamber MKF056, manufactured by BINDER (Germany)

SKU 9020-0378

APT.line™ technology ensures uniform heating, and a modern controller with a touch screen and advanced control functions will allow you to customize the operation as you need. The built-in software package APT-COM™ optimizes data logging and saves valuable time. BINDER laboratory equipment meets all modern requirements in the field of condition modeling, so you will get the best result.

Manufacturer	Binder
Моделювання умов
Температурний режим
Контроль вологості
Освітлення
Temperature range, ⁰С
Діапазон вологості
Об'єм, л

Additional information

Important characteristics of the MKF series:

Temperature range: from -40°C to +180°C;

Humidity range: from 10% to 98% vidn. vol.;

APT.line™ preheating technology;

4 potential relay contacts;

Thermal insulation using polyurethane foam;

Device for protection of samples from fogging, with the possibility of programming for accurate testing of materials;

Humidification is regulated by a capacitive sensor and steam humidification;

Heated viewing window with LED camera lighting;

Compliance with BINDER tests;

Advanced programming capabilities with the help of a convenient controller with a touch screen will allow you to put the device offline, as well as control the conditions inside;

Standard package of special software from BINDER APT-COM;™

Recording measurement data using the built-in recorder. Data can be read in an open format via USB port;

Error diagnostics system with visual and audible alarm notification;

· Diagnostic system for comprehensive analysis of the status of devices;

The inner chamber is made of stainless steel;

1 lattice shelf made of stainless steel;

Access port with silicone plugs, 50 mm in diameter, on the left (for models 56, 115 and 240);

Tubular heat exchanger

Built-in overheat protection device, class 2 (DIN 12880) with visual and audible alarm;

Resistance thermometer Pt 100 using platinum element;

4 reliable double guide castors, 2 with handbrake;

Ethernet interface;

Safe drainage and supply of water up to 1 meter in height thanks to a connecting set;

Door heating;

The tilt angle can also be adjusted;

Clock for counting the current time;

R-452A chlorofluorocarbon-free refrigerant;

Cooling is carried out using a special compression refrigeration machine.

Materials for download

Accurate reproduction of dynamic microclimate over time, Cyclic Temperature Tests, Electronics & Electrical Engineering, Material Testing, Materials Aging Research, Semiconductor manufacturing, Stress Material Tests, Temperature and climatic tests in extreme conditions

APT.line™ technology ensures uniform heating, and a modern controller with a touch screen and advanced control functions will allow you to customize the operation as you need. The built-in software package APT-COM™ optimizes data logging and saves valuable time. BINDER laboratory equipment meets all modern requirements in the field of condition modeling, so you will get the best result.

Manufacturer	Binder
Моделювання умов
Температурний режим
Контроль вологості
Освітлення
Temperature range, ⁰С
Діапазон вологості
Об'єм, л

Additional information

Important characteristics of the MKF series:

Temperature range: from -40°C to +180°C;

Humidity range: from 10% to 98% vidn. vol.;

APT.line™ preheating technology;

4 potential relay contacts;

Thermal insulation using polyurethane foam;

Device for protection of samples from fogging, with the possibility of programming for accurate testing of materials;

Humidification is regulated by a capacitive sensor and steam humidification;

Heated viewing window with LED camera lighting;

Compliance with BINDER tests;

Advanced programming capabilities with the help of a convenient controller with a touch screen will allow you to put the device offline, as well as control the conditions inside;

Standard package of special software from BINDER APT-COM;™

Recording measurement data using the built-in recorder. Data can be read in an open format via USB port;

Error diagnostics system with visual and audible alarm notification;

· Diagnostic system for comprehensive analysis of the status of devices;

The inner chamber is made of stainless steel;

1 lattice shelf made of stainless steel;

Access port with silicone plugs, 50 mm in diameter, on the left (for models 56, 115 and 240);

Tubular heat exchanger

Built-in overheat protection device, class 2 (DIN 12880) with visual and audible alarm;

Resistance thermometer Pt 100 using platinum element;

4 reliable double guide castors, 2 with handbrake;

Ethernet interface;

Safe drainage and supply of water up to 1 meter in height thanks to a connecting set;

Door heating;

The tilt angle can also be adjusted;

Clock for counting the current time;

R-452A chlorofluorocarbon-free refrigerant;

Cooling is carried out using a special compression refrigeration machine.

Materials for download

SKU 9020-0378Accurate reproduction of dynamic microclimate over time, Cyclic Temperature Tests, Electronics & Electrical Engineering, Material Testing, Materials Aging Research, Semiconductor manufacturing, Stress Material Tests, Temperature and climatic tests in extreme conditions

Climatic chamber MKF056, manufactured by BINDER (Germany)

Additional information

Materials for download

Additional information

Materials for download

Recommended products

Climatic chamber MKF1020-400V, manufactured by BINDER (Germany)

Climatic chamber MKF 240, manufactured by Binder (Germany)

Climatic chamber MKТ 240, Binder (Germany) with heating/cooling function

Climatic chamber MK 1020, Binder (Germany) with heating / cooling function