The equipment presented is perfectly suited for both basic needs and special tasks of educational institutions, research institutes, as well as various industrial needs. For example, you can quickly select the desired operating mode, view information about previous cycles (up to 200 cycles are stored in the device’s memory), or program the autoclave by choosing from 30 available programs. On the other hand, it is the presence of high-quality temperature and pressure sensors, along with the use of reliable materials, that makes this autoclave reliable and efficient. If necessary, you can install additional options, such as a vacuum pump used at the end of the sterilization cycle. The final vacuum of the system ensures that the samples are completely dried – especially when it comes to accessories with crevices and pores, such as pipette tips.
The EL 5075 benchtop autoclave has an impressive volume of 160 liters, making it an excellent solution for sterilizing large quantities of material. This way, you can significantly increase your productivity, as this device is easy to use, technologically advanced, reliable and safe. The exceptional quality of Tuttnauer’s workmanship and materials ensures that you get reproducible results and don’t waste time and money on premature service.
Comparison table of models of the EL-D series:
https://alsi.ua/avtoklavy/nastilni-avtoklavy-el-d/
| Manufacturer | Tuttnauer |
|---|---|
| Series | EL |
| Об'єм камери | 160 L |
| Temperature range, ⁰С | +105…+138°C |
| Download type | Horizontal |
Additional information
- Fo software.
- PID pressure regulator (Proportional-Integral-Differential Regulator).
- Saves information about the last 200 cycles in the device memory.
- Two flexible RT100 temperature sensors.
- You can connect up to 6 temperature sensors and 4 pressure sensors.
- 30 identification codes and passwords for different levels of access to the device.
- The controller and software comply with the FDA 21 CFR Part 11 standard.
- Input/output test (allows the engineer to check each component of the system separately).
- The sterilization temperature is 105-137 °C.
- Optional: disinfection/isometric temperature cycle with a range of 60-105 °C.
- Optional: Independent control for cross-checking cycle measurements.
- Notification of the need to replace the filter, depending on the number of cycles.
Innovative multicolor display
- Multi-color display for easy reading;
- The colors indicate the stage of the cycle;
- Quick access to important information;
- 26 languages;
- You can view the history of these cycles.
Materials for download
The equipment presented is perfectly suited for both basic needs and special tasks of educational institutions, research institutes, as well as various industrial needs. For example, you can quickly select the desired operating mode, view information about previous cycles (up to 200 cycles are stored in the device’s memory), or program the autoclave by choosing from 30 available programs. On the other hand, it is the presence of high-quality temperature and pressure sensors, along with the use of reliable materials, that makes this autoclave reliable and efficient. If necessary, you can install additional options, such as a vacuum pump used at the end of the sterilization cycle. The final vacuum of the system ensures that the samples are completely dried – especially when it comes to accessories with crevices and pores, such as pipette tips.
The EL 5075 benchtop autoclave has an impressive volume of 160 liters, making it an excellent solution for sterilizing large quantities of material. This way, you can significantly increase your productivity, as this device is easy to use, technologically advanced, reliable and safe. The exceptional quality of Tuttnauer’s workmanship and materials ensures that you get reproducible results and don’t waste time and money on premature service.
Comparison table of models of the EL-D series:
https://alsi.ua/avtoklavy/nastilni-avtoklavy-el-d/
| Manufacturer | Tuttnauer |
|---|---|
| Series | EL |
| Об'єм камери | 160 L |
| Temperature range, ⁰С | +105…+138°C |
| Download type | Horizontal |
Additional information
- Fo software.
- PID pressure regulator (Proportional-Integral-Differential Regulator).
- Saves information about the last 200 cycles in the device memory.
- Two flexible RT100 temperature sensors.
- You can connect up to 6 temperature sensors and 4 pressure sensors.
- 30 identification codes and passwords for different levels of access to the device.
- The controller and software comply with the FDA 21 CFR Part 11 standard.
- Input/output test (allows the engineer to check each component of the system separately).
- The sterilization temperature is 105-137 °C.
- Optional: disinfection/isometric temperature cycle with a range of 60-105 °C.
- Optional: Independent control for cross-checking cycle measurements.
- Notification of the need to replace the filter, depending on the number of cycles.
Innovative multicolor display
- Multi-color display for easy reading;
- The colors indicate the stage of the cycle;
- Quick access to important information;
- 26 languages;
- You can view the history of these cycles.
