Замовити Microbiological incubator Isotherm IFA, 54 l • АЛСІ

SKU 2100002IFA-54-8

The rounded corners of the inner chamber will make the cleaning process more efficient, while the Isocide™ coatingguarantees complete destruction of bacteria over the entire surface, which will eliminate any risk of contamination of samples. Exceptional homogeneity of conditions is achieved using the VentiFlow™ ventilation system, and the heat output is ensured by Solaris™ technology, which heats the chamber through an air casing. It is important to note that the device is equipped with mechanical convection, and this, in turn, means a quick recovery of temperature indicators and a minimum number of fluctuations. All data is displayed on a software panel equipped with PID SmartSense™ microprocessor. This module will allow you to program the incubator according to research requirements, and make management exceptionally simple and convenient.

Microbiological incubator IFA-54 has a volume of 54 liters and is best suited for working with a small number of samples. Modern technologies and convenient functions from the manufacturer ESCO guarantee maximum productivity and complete reliability of the results.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer	ESCO
Type of equipment	Microbiological incubators
Series	IFA Isotherm®
Temperature range, ⁰С	+4… 100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFA series:

Temperature range: ambient temperature from +7.5°C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Internal doors and shelves are easily removed and installed;

The use of economical low noise fans ebm-papst (Germany) reduces operating costs;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Low maintenance costs.

Materials for download

Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Gene cloning, Growing bacteria cultures, Growing crops of mushrooms and yeast, Microbiology, Sanitary control

The rounded corners of the inner chamber will make the cleaning process more efficient, while the Isocide™ coatingguarantees complete destruction of bacteria over the entire surface, which will eliminate any risk of contamination of samples. Exceptional homogeneity of conditions is achieved using the VentiFlow™ ventilation system, and the heat output is ensured by Solaris™ technology, which heats the chamber through an air casing. It is important to note that the device is equipped with mechanical convection, and this, in turn, means a quick recovery of temperature indicators and a minimum number of fluctuations. All data is displayed on a software panel equipped with PID SmartSense™ microprocessor. This module will allow you to program the incubator according to research requirements, and make management exceptionally simple and convenient.

Microbiological incubator IFA-54 has a volume of 54 liters and is best suited for working with a small number of samples. Modern technologies and convenient functions from the manufacturer ESCO guarantee maximum productivity and complete reliability of the results.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer	ESCO
Type of equipment	Microbiological incubators
Series	IFA Isotherm®
Temperature range, ⁰С	+4… 100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFA series:

Temperature range: ambient temperature from +7.5°C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Internal doors and shelves are easily removed and installed;

The use of economical low noise fans ebm-papst (Germany) reduces operating costs;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Low maintenance costs.

Materials for download

SKU 2100002IFA-54-8Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Gene cloning, Growing bacteria cultures, Growing crops of mushrooms and yeast, Microbiology, Sanitary control

Microbiological incubator Isotherm IFA, 54 l

Additional information

Materials for download

Additional information

Materials for download

Recommended products

Magnetic stirrer with heating MR Hei-Connect complete with temperature sensor Pt 1000, manufactured by Heidolph Instruments (Germany)

Magnetic stirrer with heating Hei-PLATE Mix’n’Heat Core, manufactured by Heidolph (Germany)

Automatic laboratory vertical autoclave, 160 l, model 5075ELV-D

Biosafety cabinet type II B2 Airstream®, AB2-4S1, complete with UV lamp, stand and two valves (ABBV-01 and B2-DAMPER)