Microbiological incubator Isotherm IFA, 32 l

SKU 2100001IFA-32-8

The VentiFlow™ ventilation system contributes to homogeneous conditions, and forced convection will ensure that there are no fluctuations. Solaris™ technology is responsible for preheating the chamber through the air casing, which determines maximum heat output. With ESCO, in addition to the accuracy of reproducible conditions, you get convenient and safe equipment. The front panel makes it easy to adjust the basic parameters, and the integrated PID SmartSense™ microprocessor makes it possible to program the device. Stainless steel and rounded corners of the chamber make the cleaning process fast and as efficient as possible, while the Isocide™ coating guarantees the destruction of 99.9% of bacteria over the entire surface.

The IFA-32 is a 32-litre microbiology incubator that will help you create precise and reliable conditions as quickly as possible. The quality of materials from ESCO eliminates the risk of any errors during the working cycle, while modern technologies ensure high productivity.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer	ESCO
Type of equipment	Microbiological incubators
Series	IFA Isotherm®
Temperature range, ⁰С	+4… 100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFA series:

Temperature range: ambient temperature from +7.5°C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Internal doors and shelves are easily removed and installed;

The use of economical low noise fans ebm-papst (Germany) reduces operating costs;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Low maintenance costs.

Materials for download

The VentiFlow™ ventilation system contributes to homogeneous conditions, and forced convection will ensure that there are no fluctuations. Solaris™ technology is responsible for preheating the chamber through the air casing, which determines maximum heat output. With ESCO, in addition to the accuracy of reproducible conditions, you get convenient and safe equipment. The front panel makes it easy to adjust the basic parameters, and the integrated PID SmartSense™ microprocessor makes it possible to program the device. Stainless steel and rounded corners of the chamber make the cleaning process fast and as efficient as possible, while the Isocide™ coating guarantees the destruction of 99.9% of bacteria over the entire surface.

The IFA-32 is a 32-litre microbiology incubator that will help you create precise and reliable conditions as quickly as possible. The quality of materials from ESCO eliminates the risk of any errors during the working cycle, while modern technologies ensure high productivity.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer	ESCO
Type of equipment	Microbiological incubators
Series	IFA Isotherm®
Temperature range, ⁰С	+4… 100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFA series:

Temperature range: ambient temperature from +7.5°C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Internal doors and shelves are easily removed and installed;

The use of economical low noise fans ebm-papst (Germany) reduces operating costs;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Low maintenance costs.

Materials for download

SKU 2100001IFA-32-8

Microbiological incubator Isotherm IFA, 32 l

Additional information

Materials for download

Additional information

Materials for download

Recommended products

CO2 incubator CCL-170B, volume 170 l

Microbiological incubator with cooling KB 115

CO2 incubator CCL-050T-8, 50l, with O2 control

CO2 incubator CCL-170T-8-HHS, volume 170 l, with high temperature sterilization, with O2 control