Microbiological incubator Isotherm IFA, 240 l

SKU 2100015IFA-240-8

Solaris™ technology guarantees maximum heat output by comprehensively heating the chamber through the casing, while the VentiFlow™ ventilation system takes care of temperature uniformity. Mechanical convection, in turn, minimizes fluctuations and increases labor productivity by quickly restoring parameters after depressurization. The Isocide™ coating prevents the development of bacteria on the surface of the device, and the ergonomic design of the chamber will make cleaning extremely fast. Device management is easy because the status of metrics is displayed on the dashboard. The integrated PID SmartSense™ microprocessor and a wide range of available settings make it possible to take the incubator offline, which certainly optimizes the course of research. The range of additional options and accessories will allow you to supplement your equipment with the necessary elements at any time, which contributes to the creation of the most difficult conditions.

The IFA 240 incubator is best suited for work in the fields of microbiology, food industry, pharmaceuticals and genetics. The large volume of 240 litres combined with accuracy and quality from ESCO will help you to carry out studies with more samples and not worry about the reliability of the results.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer	ESCO
Type of equipment	Microbiological incubators
Series	IFA Isotherm®
Temperature range, ⁰С	+4… 100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFA series:

Temperature range: ambient temperature from +7.5°C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Internal doors and shelves are easily removed and installed;

The use of economical low noise fans ebm-papst (Germany) reduces operating costs;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Low maintenance costs.

Materials for download

Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Gene cloning, Growing bacteria cultures, Growing crops of mushrooms and yeast, Microbiology, Sanitary control

Solaris™ technology guarantees maximum heat output by comprehensively heating the chamber through the casing, while the VentiFlow™ ventilation system takes care of temperature uniformity. Mechanical convection, in turn, minimizes fluctuations and increases labor productivity by quickly restoring parameters after depressurization. The Isocide™ coating prevents the development of bacteria on the surface of the device, and the ergonomic design of the chamber will make cleaning extremely fast. Device management is easy because the status of metrics is displayed on the dashboard. The integrated PID SmartSense™ microprocessor and a wide range of available settings make it possible to take the incubator offline, which certainly optimizes the course of research. The range of additional options and accessories will allow you to supplement your equipment with the necessary elements at any time, which contributes to the creation of the most difficult conditions.

The IFA 240 incubator is best suited for work in the fields of microbiology, food industry, pharmaceuticals and genetics. The large volume of 240 litres combined with accuracy and quality from ESCO will help you to carry out studies with more samples and not worry about the reliability of the results.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer	ESCO
Type of equipment	Microbiological incubators
Series	IFA Isotherm®
Temperature range, ⁰С	+4… 100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFA series:

Temperature range: ambient temperature from +7.5°C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Internal doors and shelves are easily removed and installed;

The use of economical low noise fans ebm-papst (Germany) reduces operating costs;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Low maintenance costs.

Materials for download

SKU 2100015IFA-240-8Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Gene cloning, Growing bacteria cultures, Growing crops of mushrooms and yeast, Microbiology, Sanitary control

Microbiological incubator Isotherm IFA, 240 l

Additional information

Materials for download

Additional information

Materials for download

Recommended products

Automatic laboratory horizontal autoclave, 85 l, model 3870EL-D

Biosafety cabinet type II B2 Airstream®, AB2-5S1, complete with UV lamp, stand and two valves (ABBV-01 and B2-DAMPER)

Biosafety cabinet class II Airstream® (S-series), AC2-4S8, complete with stand-stand and UV lamp

Airstream® Class III Biosafety Cabinet, AC3-6B1