alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentHeating/cooling/sterilizationIncubatorsIncubator with cooling Isotherm IFC, 240 l

Incubator with cooling Isotherm IFC, 240 l

SKU 2100011IFC-240-8

There is no need to worry about the risk of contamination, as the device is equipped with an effective UV lamp and a special Isocide™ antibacterial coating that guarantees complete safety of your samples. It is known that accuracy and uniformity of conditions are key parameters of any research work, which is why ESCO has introduced the VentiFlow™ ventilation system and Solaris™ preheating technology, which will ensure the reliability of the results obtained. If necessary, you can install the desired option or accessory at any time to create an even more effective microclimate.

It is known that some studies require equipment that could reproduce a wide range of conditions and maintain them for a long time. The IFC-240 cooled incubator from the Isotherm® line guarantees the most accurate microclimate for work in the field of water quality control, growing cells of insects, plants, fish, as well as various microorganisms. The device is equipped with an intuitive software panel with PID SmartSense™ microprocessor, which will help vary the temperature value from 0°C to +100°C, and also allows you to customize the device according to your requirements. The chamber volume, for its part, is 240 liters, which, combined with highly efficient functionality and advanced technologies from ESCO, will ensure exceptional productivity.

Comparison table of models of the IFC Isotherm® series:
https://alsi.ua/okholodzhuvalni-inkubatory/inkubatory-z-okholodzhenniam-esco-seriia-ifc-isotherm/

Manufacturer

ESCO

Type of equipment

Cooled incubators

Series

IFC Isotherm®

Temperature range, ⁰С

0…100°С

Display

Fluorescent Digital

Working volume of the camera

Additional information

Important advantages of the IFC series:

  • Temperature range: ambient temperature from 0 °C to +100°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Automatic UV disinfection works after starting during the testing process, and can be adjusted manually if necessary;
  • The UV lamp turns off when the door is opened and turns on after it is closed;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • The design of a “clean room” with a minimum of connections and gaps;
  • Low noise during operation and maximum energy efficiency;
  • Perforated stainless steel shelves promote air circulation and uniformity;
  • The automatic defrost function is self-activating regularly;
  • Water collection tank during the defrosting process;
  • Low maintenance costs.

 

Materials for download

There is no need to worry about the risk of contamination, as the device is equipped with an effective UV lamp and a special Isocide™ antibacterial coating that guarantees complete safety of your samples. It is known that accuracy and uniformity of conditions are key parameters of any research work, which is why ESCO has introduced the VentiFlow™ ventilation system and Solaris™ preheating technology, which will ensure the reliability of the results obtained. If necessary, you can install the desired option or accessory at any time to create an even more effective microclimate.

It is known that some studies require equipment that could reproduce a wide range of conditions and maintain them for a long time. The IFC-240 cooled incubator from the Isotherm® line guarantees the most accurate microclimate for work in the field of water quality control, growing cells of insects, plants, fish, as well as various microorganisms. The device is equipped with an intuitive software panel with PID SmartSense™ microprocessor, which will help vary the temperature value from 0°C to +100°C, and also allows you to customize the device according to your requirements. The chamber volume, for its part, is 240 liters, which, combined with highly efficient functionality and advanced technologies from ESCO, will ensure exceptional productivity.

Comparison table of models of the IFC Isotherm® series:
https://alsi.ua/okholodzhuvalni-inkubatory/inkubatory-z-okholodzhenniam-esco-seriia-ifc-isotherm/

Manufacturer

ESCO

Type of equipment

Cooled incubators

Series

IFC Isotherm®

Temperature range, ⁰С

0…100°С

Display

Fluorescent Digital

Working volume of the camera

Additional information

Important advantages of the IFC series:

  • Temperature range: ambient temperature from 0 °C to +100°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Automatic UV disinfection works after starting during the testing process, and can be adjusted manually if necessary;
  • The UV lamp turns off when the door is opened and turns on after it is closed;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • The design of a “clean room” with a minimum of connections and gaps;
  • Low noise during operation and maximum energy efficiency;
  • Perforated stainless steel shelves promote air circulation and uniformity;
  • The automatic defrost function is self-activating regularly;
  • Water collection tank during the defrosting process;
  • Low maintenance costs.

 

Materials for download

SKU 2100011IFC-240-8

Recommended products