Incubator cooled Isotherm IFC, 170 l

SKU 2100035IFC-170-8

The safety of the biomaterial is ensured by the antibacterial coating Isocide™ and the possibility of ultraviolet irradiation. Heat output, in particular, is guaranteed by the Solaris™ chamber preheating technology, while the VentiFlow™ ventilation system will ensure uniformity of temperature throughout the volume. It is worth noting that compliance with the specified indicators is a key characteristic of any research, because this determines the reliability of the results obtained. The software panel on the front of the device will inform you about the status of the main parameters, and the integrated PID SmartSense™ microprocessor will allow you to adjust the operation of the device according to your requirements. A wide range of options and accessories from ESCО will allow, if necessary, to supplement the equipment with the necessary elements for even more efficient incubation.

The IFC-170 incubator is equipped with a cooling function that allows you to create specific conditions from 0°C to +100°C. When using the presented laboratory equipment, you do not need to worry about malfunctions and any inaccuracies, because the manufacturer ESCО successfully combines unsurpassed quality and high manufacturability. The universal volume of 170 liters, for its part, contributes to productive work with more samples.

Comparison table of models of the IFC Isotherm® series:
https://alsi.ua/okholodzhuvalni-inkubatory/inkubatory-z-okholodzhenniam-esco-seriia-ifc-isotherm/

Manufacturer	ESCO
Type of equipment	Cooled incubators
Series	IFC Isotherm®
Temperature range, ⁰С	0…100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFC series:

Temperature range: ambient temperature from 0 °C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Automatic UV disinfection works after starting during the testing process, and can be adjusted manually if necessary;

The UV lamp turns off when the door is opened and turns on after it is closed;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

The design of a “clean room” with a minimum of connections and gaps;

Low noise during operation and maximum energy efficiency;

Perforated stainless steel shelves promote air circulation and uniformity;

The automatic defrost function is self-activating regularly;

Water collection tank during the defrosting process;

Low maintenance costs.

Materials for download

Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Analysis of microbiological purity of products of cosmetology industry, Growing crops of mushrooms and yeast, MBH, Microbiology, Sanitary control

The safety of the biomaterial is ensured by the antibacterial coating Isocide™ and the possibility of ultraviolet irradiation. Heat output, in particular, is guaranteed by the Solaris™ chamber preheating technology, while the VentiFlow™ ventilation system will ensure uniformity of temperature throughout the volume. It is worth noting that compliance with the specified indicators is a key characteristic of any research, because this determines the reliability of the results obtained. The software panel on the front of the device will inform you about the status of the main parameters, and the integrated PID SmartSense™ microprocessor will allow you to adjust the operation of the device according to your requirements. A wide range of options and accessories from ESCО will allow, if necessary, to supplement the equipment with the necessary elements for even more efficient incubation.

The IFC-170 incubator is equipped with a cooling function that allows you to create specific conditions from 0°C to +100°C. When using the presented laboratory equipment, you do not need to worry about malfunctions and any inaccuracies, because the manufacturer ESCО successfully combines unsurpassed quality and high manufacturability. The universal volume of 170 liters, for its part, contributes to productive work with more samples.

Comparison table of models of the IFC Isotherm® series:
https://alsi.ua/okholodzhuvalni-inkubatory/inkubatory-z-okholodzhenniam-esco-seriia-ifc-isotherm/

Manufacturer	ESCO
Type of equipment	Cooled incubators
Series	IFC Isotherm®
Temperature range, ⁰С	0…100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFC series:

Temperature range: ambient temperature from 0 °C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Automatic UV disinfection works after starting during the testing process, and can be adjusted manually if necessary;

The UV lamp turns off when the door is opened and turns on after it is closed;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

The design of a “clean room” with a minimum of connections and gaps;

Low noise during operation and maximum energy efficiency;

Perforated stainless steel shelves promote air circulation and uniformity;

The automatic defrost function is self-activating regularly;

Water collection tank during the defrosting process;

Low maintenance costs.

Materials for download

SKU 2100035IFC-170-8Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Analysis of microbiological purity of products of cosmetology industry, Growing crops of mushrooms and yeast, MBH, Microbiology, Sanitary control

Incubator cooled Isotherm IFC, 170 l

Additional information

Materials for download

Additional information

Materials for download

Recommended products

Automatic laboratory vertical autoclave, 85 l, model 3870ELV-D

Automatic laboratory horizontal autoclave, 85 l, model 3870EL-D

Cytoculture CYT-4A1 Cytotoxic® Safety Cabinet

Automatic laboratory horizontal autoclave, 28 l, model 2840 EL-D