Incubator with cooling Isotherm IFC, 110 l

SKU 2100010IFC-110L-8

The preheating of the Solaris™ chamber contributes to the best heat output, which, in combination with the VentiFlow™ ventilation system, guarantees exceptional temperature uniformity and therefore reliable results. There is no need to worry about the safety of the specimens, as UV exposure together with Isocide™ coating eliminate the risk of contamination. Convenience and ease of management play a key role today, because time depends on it, which is always very lacking. With the SmartSense dashboard and UNDER the SmartSense™ microprocessor, you can put the device in the mode of operation you need, and the rounded corners of the camera will significantly speed up the cleaning process. The quality of production and materials guaranteed by the manufacturer ESCО will be the key to your success.

The 110 litre IFC-110 cooled incubator is designed to create precise conditions in the temperature range from 0°C to +100°C. You can use the presented devices in many fields of scientific research: microbiology, mycology, material testing, water quality control, etc. ESCО guarantees the durability and accuracy of equipment, regardless of the complexity of the tasks.

Comparison table of models of the IFC Isotherm® series:
https://alsi.ua/okholodzhuvalni-inkubatory/inkubatory-z-okholodzhenniam-esco-seriia-ifc-isotherm/

Manufacturer	ESCO
Type of equipment	Cooled incubators
Series	IFC Isotherm®
Temperature range, ⁰С	0…100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFC series:

Temperature range: ambient temperature from 0 °C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Automatic UV disinfection works after starting during the testing process, and can be adjusted manually if necessary;

The UV lamp turns off when the door is opened and turns on after it is closed;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

The design of a “clean room” with a minimum of connections and gaps;

Low noise during operation and maximum energy efficiency;

Perforated stainless steel shelves promote air circulation and uniformity;

The automatic defrost function is self-activating regularly;

Water collection tank during the defrosting process;

Low maintenance costs.

Materials for download

Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Analysis of microbiological purity of products of cosmetology industry, Growing crops of mushrooms and yeast, MBH, Microbiology, Sanitary control

The preheating of the Solaris™ chamber contributes to the best heat output, which, in combination with the VentiFlow™ ventilation system, guarantees exceptional temperature uniformity and therefore reliable results. There is no need to worry about the safety of the specimens, as UV exposure together with Isocide™ coating eliminate the risk of contamination. Convenience and ease of management play a key role today, because time depends on it, which is always very lacking. With the SmartSense dashboard and UNDER the SmartSense™ microprocessor, you can put the device in the mode of operation you need, and the rounded corners of the camera will significantly speed up the cleaning process. The quality of production and materials guaranteed by the manufacturer ESCО will be the key to your success.

The 110 litre IFC-110 cooled incubator is designed to create precise conditions in the temperature range from 0°C to +100°C. You can use the presented devices in many fields of scientific research: microbiology, mycology, material testing, water quality control, etc. ESCО guarantees the durability and accuracy of equipment, regardless of the complexity of the tasks.

Comparison table of models of the IFC Isotherm® series:
https://alsi.ua/okholodzhuvalni-inkubatory/inkubatory-z-okholodzhenniam-esco-seriia-ifc-isotherm/

Manufacturer	ESCO
Type of equipment	Cooled incubators
Series	IFC Isotherm®
Temperature range, ⁰С	0…100°С
Display	Fluorescent Digital
Working volume of the camera

Additional information

Important advantages of the IFC series:

Temperature range: ambient temperature from 0 °C to +100°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Automatic UV disinfection works after starting during the testing process, and can be adjusted manually if necessary;

The UV lamp turns off when the door is opened and turns on after it is closed;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

The design of a “clean room” with a minimum of connections and gaps;

Low noise during operation and maximum energy efficiency;

Perforated stainless steel shelves promote air circulation and uniformity;

The automatic defrost function is self-activating regularly;

Water collection tank during the defrosting process;

Low maintenance costs.

Materials for download

SKU 2100010IFC-110L-8Analysis of microbiological purity of food industry products, Analysis of microbiological purity of pharmaceutical industry products, Analysis of microbiological purity of products of cosmetology industry, Growing crops of mushrooms and yeast, MBH, Microbiology, Sanitary control

Incubator with cooling Isotherm IFC, 110 l

Additional information

Materials for download

Additional information

Materials for download

Recommended products

Magnetic stirrer with heating MR Hei-Connect complete with temperature sensor Pt 1000, manufactured by Heidolph Instruments (Germany)

Biosafety cabinet type II B2 Airstream®, AB2-4S1, complete with UV lamp, stand and two valves (ABBV-01 and B2-DAMPER)

Automatic laboratory horizontal autoclave, 65 l, model 3850EL-D

Automatic laboratory horizontal autoclave, 28 l, model 2840 EL-D