alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentHeating/cooling/sterilizationIncubatorsCO2 incubator CelCulture CCL-240B-8-HHS, volume 240, l with high temperature sterilization

CO2 incubator CelCulture CCL-240B-8-HHS, volume 240, l with high temperature sterilization

SKU 2170270CCL-240B-8-HHS

Temperature uniformity is ensured by the VentiFlow™ ventilation system and direct heating of the chamber through the air casing. The accuracy of the acidity level, in particular, is guaranteed by a CO2 sensor with infrared technology. Information about the status of the indicators is displayed on the front panel, and the SmartSense™ microprocessor integrated into it will allow you to customize the device according to your requirements. The safety of samples is a key factor in any research, and that is why ESCO has introduced a whole disinfecting complex: hot air sterilization at 180°C, ROBUST™ procedure and Isocide™ coating. The quality of production and materials is guaranteed by the manufacturer and will be the key to the success of your work, regardless of the complexity of the tasks.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

No

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+180

Display

Fluorescent Digital

ULPA filter

Yes

Working volume of the camera

Additional information

Important benefits of the CelCulture® CCL-B-HHS series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • High-temperature sterilization with hot air at 180°C;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless stainless steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

 

Materials for download

Temperature uniformity is ensured by the VentiFlow™ ventilation system and direct heating of the chamber through the air casing. The accuracy of the acidity level, in particular, is guaranteed by a CO2 sensor with infrared technology. Information about the status of the indicators is displayed on the front panel, and the SmartSense™ microprocessor integrated into it will allow you to customize the device according to your requirements. The safety of samples is a key factor in any research, and that is why ESCO has introduced a whole disinfecting complex: hot air sterilization at 180°C, ROBUST™ procedure and Isocide™ coating. The quality of production and materials is guaranteed by the manufacturer and will be the key to the success of your work, regardless of the complexity of the tasks.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

No

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+180

Display

Fluorescent Digital

ULPA filter

Yes

Working volume of the camera

Additional information

Important benefits of the CelCulture® CCL-B-HHS series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • High-temperature sterilization with hot air at 180°C;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless stainless steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

 

Materials for download

Recommended products