alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentHeating/cooling/sterilizationIncubatorsCO2 incubator CCL-240T, volume 240 l, with O2 control

CO2 incubator CCL-240T, volume 240 l, with O2 control

SKU 2170061CCL-240T-8

The homogeneity of conditions is guaranteed by a successful combination of the VentiFlow™ ventilation system and direct heating of the chamber through the air casing. The safety of the biomaterial, in turn, is achieved by a complex of disinfecting procedures ROBUST™ and Isocide™ coating, which destroys 99.9% of bacteria on the surface of the device. The level of acidity remains constant throughout the entire cycle of operation, because the CO2 sensor with infrared technology guarantees exceptional accuracy. The one-piece design of the chamber with rounded corners will greatly simplify the cleaning process and reduce precious time. It is also worth noting that all ESCO equipment is distinguished by the quality of production and materials, which means that you get a wear-resistant and reliable tool for research.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

Yes

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+90

Display

Fluorescent Digital

ULPA filter

Yes

Working volume of the camera

Additional information

Important advantages of the CelCulture® CCL-T series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • Oxygen control to create hypoxic conditions;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless galvanized steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

Materials for download

The homogeneity of conditions is guaranteed by a successful combination of the VentiFlow™ ventilation system and direct heating of the chamber through the air casing. The safety of the biomaterial, in turn, is achieved by a complex of disinfecting procedures ROBUST™ and Isocide™ coating, which destroys 99.9% of bacteria on the surface of the device. The level of acidity remains constant throughout the entire cycle of operation, because the CO2 sensor with infrared technology guarantees exceptional accuracy. The one-piece design of the chamber with rounded corners will greatly simplify the cleaning process and reduce precious time. It is also worth noting that all ESCO equipment is distinguished by the quality of production and materials, which means that you get a wear-resistant and reliable tool for research.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

Yes

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+90

Display

Fluorescent Digital

ULPA filter

Yes

Working volume of the camera

Additional information

Important advantages of the CelCulture® CCL-T series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • Oxygen control to create hypoxic conditions;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless galvanized steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

Materials for download

Recommended products