alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentHeating/cooling/sterilizationIncubatorsCO2 incubator CCL-170T, volume 170 l, with control O2

CO2 incubator CCL-170T, volume 170 l, with control O2

SKU 2170047CCL-170T-8-C1

There is no need to worry about the reliability of the results, because the Isocide™ coating destroys 99.9% of bacteria on the entire surface of the device, which, in combination with the ROBUST™ decontamination complex, will ensure complete sterility inside. The direct heating of the chamber and the VentiFlow™ ventilation system, for their part, will take care of the accuracy and uniformity of temperature. The level of acidity will be stable throughout the research process, because the installed CO2 sensor with infrared technology is distinguished by its effectiveness. Convenient cleaning, ease of operation and a wide range of available settings will take your research to a whole new level.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

Yes

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+90

Display

Fluorescent Digital

ULPA filter

Yes

Working volume of the camera

Additional information

Important advantages of the CelCulture® CCL-T series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • Oxygen control to create hypoxic conditions;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless galvanized steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

 

Materials for download

There is no need to worry about the reliability of the results, because the Isocide™ coating destroys 99.9% of bacteria on the entire surface of the device, which, in combination with the ROBUST™ decontamination complex, will ensure complete sterility inside. The direct heating of the chamber and the VentiFlow™ ventilation system, for their part, will take care of the accuracy and uniformity of temperature. The level of acidity will be stable throughout the research process, because the installed CO2 sensor with infrared technology is distinguished by its effectiveness. Convenient cleaning, ease of operation and a wide range of available settings will take your research to a whole new level.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

Yes

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+90

Display

Fluorescent Digital

ULPA filter

Yes

Working volume of the camera

Additional information

Important advantages of the CelCulture® CCL-T series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • Oxygen control to create hypoxic conditions;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless galvanized steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

 

Materials for download

Recommended products