alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentAir purificationBiosafety boxesAirstream® Class III Biosafety Cabinet, AC3-6B1

Airstream® Class III Biosafety Cabinet, AC3-6B1

SKU 2010210AC3-6B1

Work in such a box is performed through the glove ports in front of the cabinet. During normal operation, the biosafety cabinet is maintained at a negative pressure relative to the environment. The exhaust air is twice filtered through high-quality ULPA filters, providing 100,000 times better protection than a single-stage filter.

Comparison table of models of biosafety boxes of class III Esco Airstream®:
https://alsi.ua/kabinet-biolohichnoi-bezpeky/boksy-biolohichnoi-bezpeky-iii-klasu/

.

Manufacturer

ESCO

Series

Airstream

Biosafety class

III

Nominal width

5 feet (1.5 m)

The material of the side walls

Stainless steel

Additional information

Airstream® Class III Biosafety Cabinet, AC3-6 B1

  • The exhaust air is twice filtered through high-quality ULPA filters with an efficiency of 99.999% for particles of size 0.1-0.3μm;
  • The exclusive dual exhaust filter provides protection 100,000 times better than a single-stage filter;
  • Two independent fans for trouble-free system operation;
  • The microprocessor control system SentinelTM Silver provides constant monitoring of pressure and air flow with visual and audible alarm;
  • An air differential pressure gauge installed at the rear of the box controls the tracking of negative pressure in the working area;
  • The box operates at negative pressure relative to the pressure in the laboratory in order to prevent the leakage of pathogenic materials from the working area to the outside;
  • The gloves are made of solid neoprene and guarantee maximum protection;
  • Easy and safe change of gloves is possible due to the design of special holes on the front panel;
  • The built-in gateway with lockable doors makes it possible to transfer hazardous materials without the risk of environmental pollution;
  • The Isocide™ antimicrobial coating on all painted surfaces minimizes contamination;
  • The curved front wall provides ergonomics of the workplace;
  • Each biological safety box is tested at the factory.

Equipment.

– UV lamp

– electrical sockets (2 pcs)

– stand-stand

– optional ULPA filter

– neoprene gloves* (4 pcs)

– exhaust collar

– two valves (ABBV-01 and B2-DAMPER)

 

*glove size can be selected when ordering

Work in such a box is performed through the glove ports in front of the cabinet. During normal operation, the biosafety cabinet is maintained at a negative pressure relative to the environment. The exhaust air is twice filtered through high-quality ULPA filters, providing 100,000 times better protection than a single-stage filter.

Comparison table of models of biosafety boxes of class III Esco Airstream®:
https://alsi.ua/kabinet-biolohichnoi-bezpeky/boksy-biolohichnoi-bezpeky-iii-klasu/

.

Manufacturer

ESCO

Series

Airstream

Biosafety class

III

Nominal width

5 feet (1.5 m)

The material of the side walls

Stainless steel

Additional information

Airstream® Class III Biosafety Cabinet, AC3-6 B1

  • The exhaust air is twice filtered through high-quality ULPA filters with an efficiency of 99.999% for particles of size 0.1-0.3μm;
  • The exclusive dual exhaust filter provides protection 100,000 times better than a single-stage filter;
  • Two independent fans for trouble-free system operation;
  • The microprocessor control system SentinelTM Silver provides constant monitoring of pressure and air flow with visual and audible alarm;
  • An air differential pressure gauge installed at the rear of the box controls the tracking of negative pressure in the working area;
  • The box operates at negative pressure relative to the pressure in the laboratory in order to prevent the leakage of pathogenic materials from the working area to the outside;
  • The gloves are made of solid neoprene and guarantee maximum protection;
  • Easy and safe change of gloves is possible due to the design of special holes on the front panel;
  • The built-in gateway with lockable doors makes it possible to transfer hazardous materials without the risk of environmental pollution;
  • The Isocide™ antimicrobial coating on all painted surfaces minimizes contamination;
  • The curved front wall provides ergonomics of the workplace;
  • Each biological safety box is tested at the factory.

Equipment.

– UV lamp

– electrical sockets (2 pcs)

– stand-stand

– optional ULPA filter

– neoprene gloves* (4 pcs)

– exhaust collar

– two valves (ABBV-01 and B2-DAMPER)

 

*glove size can be selected when ordering

Recommended products