alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentHeating/cooling/sterilizationIncubatorsCO2 incubator CellXpert® C170 with 4-segment inner door

CO2 incubator CellXpert® C170 with 4-segment inner door

SKU 6734000041

The homogeneity of conditions is guaranteed by a special heating technology using an advanced system of sensors throughout the working volume, and the absence of a fan, in particular, contributes to silent operation and the absence of unwanted vibrations. No need to worry about premature damage or corrosion, because the one-piece stainless steel chamber will impress you with its wear resistance, while the rounded corners will significantly reduce the cleaning time. Information about the status of indicators is displayed on the LED display, and the device is controlled using an intuitive controller located in front. Resistant to moisture as well as high temperatures, the infrared CO2 sensor will provide your research with a stable level of acidity, regardless of their duration. After all, you can supplement your device at any time with the necessary options or accessories for even more efficient incubation.

Every year the requirements for laboratory equipment are constantly growing, which is a consequence of rapid scientific and technological development, and that is why it is extremely important to choose a device that could become a universal solution for many years. Eppendorf presents CO 2-incubator CellXpert® C170 with high-temperature sterilization at 140°C with 4-segment doors, which is distinguished by its accuracy and reliability. The widespread use in tissue engineering, cell cultivation, cancer research, as well as IVF once again proves exceptional efficiency, which, combined with a volume of 170 liters, means maximum productivity. The quality of production and materials from the German company Eppendorf will be a solid foundation for your success, despite the complexity of the tasks.

Comparison table of models of the CellXpert® series:
https://alsi.ua/co2-inkubatory/so2-inkubatory-eppendorf-seriia-cellxpert/

Manufacturer

Eppendorf

Type of equipment

CO2 incubators

Series

CellXpert®

Об'єм камери

76-175 l

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

No

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+140

Display

Fluorescent Digital

Additional information

Important advantages of the CellXpert®C170 series with high-temperature sterilization at 140°C with 4-segment doors:

  • Direct control of gas supply;
  • Seamless stainless steel chamber;
  • Intuitive LED screen for indicating temperature, CO2 concentration;
  • 4-section internal doors for faster access to samples without significant disturbance of the internal atmosphere;
  • CO₂ sensor with sterilised infrared technology;
  • Fanless heating of the chamber, controlled by a network of sensors throughout the chamber;
  • Good ratio of the working volume of the chamber to the overall dimensions of the incubator and the possibility of stacking;
  • Safe operation of the device due to control of system functions such as temperature, %CO2, etc.;
  • High-temperature disinfection function at 140°C;
  • Hermetically sealed internal glass doors;
  • Direct data registration during the operation of the incubator with output via the Ethernet port;
  • Optionally, the VisioNize® module can be installed to receive messages and remotely monitor device operation.

Materials for download

The homogeneity of conditions is guaranteed by a special heating technology using an advanced system of sensors throughout the working volume, and the absence of a fan, in particular, contributes to silent operation and the absence of unwanted vibrations. No need to worry about premature damage or corrosion, because the one-piece stainless steel chamber will impress you with its wear resistance, while the rounded corners will significantly reduce the cleaning time. Information about the status of indicators is displayed on the LED display, and the device is controlled using an intuitive controller located in front. Resistant to moisture as well as high temperatures, the infrared CO2 sensor will provide your research with a stable level of acidity, regardless of their duration. After all, you can supplement your device at any time with the necessary options or accessories for even more efficient incubation.

Every year the requirements for laboratory equipment are constantly growing, which is a consequence of rapid scientific and technological development, and that is why it is extremely important to choose a device that could become a universal solution for many years. Eppendorf presents CO 2-incubator CellXpert® C170 with high-temperature sterilization at 140°C with 4-segment doors, which is distinguished by its accuracy and reliability. The widespread use in tissue engineering, cell cultivation, cancer research, as well as IVF once again proves exceptional efficiency, which, combined with a volume of 170 liters, means maximum productivity. The quality of production and materials from the German company Eppendorf will be a solid foundation for your success, despite the complexity of the tasks.

Comparison table of models of the CellXpert® series:
https://alsi.ua/co2-inkubatory/so2-inkubatory-eppendorf-seriia-cellxpert/

Manufacturer

Eppendorf

Type of equipment

CO2 incubators

Series

CellXpert®

Об'єм камери

76-175 l

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

No

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+140

Display

Fluorescent Digital

Additional information

Important advantages of the CellXpert®C170 series with high-temperature sterilization at 140°C with 4-segment doors:

  • Direct control of gas supply;
  • Seamless stainless steel chamber;
  • Intuitive LED screen for indicating temperature, CO2 concentration;
  • 4-section internal doors for faster access to samples without significant disturbance of the internal atmosphere;
  • CO₂ sensor with sterilised infrared technology;
  • Fanless heating of the chamber, controlled by a network of sensors throughout the chamber;
  • Good ratio of the working volume of the chamber to the overall dimensions of the incubator and the possibility of stacking;
  • Safe operation of the device due to control of system functions such as temperature, %CO2, etc.;
  • High-temperature disinfection function at 140°C;
  • Hermetically sealed internal glass doors;
  • Direct data registration during the operation of the incubator with output via the Ethernet port;
  • Optionally, the VisioNize® module can be installed to receive messages and remotely monitor device operation.

Materials for download

Recommended products