alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentHeating/cooling/sterilizationIncubatorsMicrobiological incubator Isotherm IFA, 110 l

Microbiological incubator Isotherm IFA, 110 l

SKU 2100003IFA-110-8

The parameters are controlled using the front panel equipped with PID SmartSense™ microprocessor, which will allow you to take the device offline. The VentiFlow™ ventilation system takes care of the uniformity of temperature, while the Solaris™ preheating technology ensures the best heat output. There is no need to worry about contamination of the samples, because the rounded corners of the chamber will significantly reduce the cleaning time, and the Isocide™ coating will prevent the spread of bacteria to the entire surface. Exceptional quality of production and materials from the manufacturer ESCO will be the key to your success.

Modern research in the field of microbiology requires precise equipment that would be distinguished by ease of use and reliability of the results obtained. Incubator ESCO IFA-110, with a volume of 110 liters, with forced convection will cope with the reproduction of a wide variety of conditions and guarantees the highest productivity.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer

ESCO

Type of equipment

Microbiological incubators

Series

IFA Isotherm®

Temperature range, ⁰С

+4… 100°С

Display

Fluorescent Digital

Working volume of the camera

Additional information

Important advantages of the IFA series:

  • Temperature range: ambient temperature from +7.5°C to +100°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • Internal doors and shelves are easily removed and installed;
  • The use of economical low noise fans ebm-papst (Germany) reduces operating costs;
  • The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;
  • Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;
  • Overheating protection device class 3.1 DIN 12880;
  • Data output via RS485 interface;
  • Low maintenance costs.

 

Materials for download

The parameters are controlled using the front panel equipped with PID SmartSense™ microprocessor, which will allow you to take the device offline. The VentiFlow™ ventilation system takes care of the uniformity of temperature, while the Solaris™ preheating technology ensures the best heat output. There is no need to worry about contamination of the samples, because the rounded corners of the chamber will significantly reduce the cleaning time, and the Isocide™ coating will prevent the spread of bacteria to the entire surface. Exceptional quality of production and materials from the manufacturer ESCO will be the key to your success.

Modern research in the field of microbiology requires precise equipment that would be distinguished by ease of use and reliability of the results obtained. Incubator ESCO IFA-110, with a volume of 110 liters, with forced convection will cope with the reproduction of a wide variety of conditions and guarantees the highest productivity.

IFA Isotherm® series model comparison table:
https://alsi.ua/mikrobiolohichni-inkubatory/mikrobiolohichni-inkubatory-esco-seriia-ifa-isotherm/

Manufacturer

ESCO

Type of equipment

Microbiological incubators

Series

IFA Isotherm®

Temperature range, ⁰С

+4… 100°С

Display

Fluorescent Digital

Working volume of the camera

Additional information

Important advantages of the IFA series:

  • Temperature range: ambient temperature from +7.5°C to +100°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • Internal doors and shelves are easily removed and installed;
  • The use of economical low noise fans ebm-papst (Germany) reduces operating costs;
  • The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;
  • Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;
  • Overheating protection device class 3.1 DIN 12880;
  • Data output via RS485 interface;
  • Low maintenance costs.

 

Materials for download

Recommended products