alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

HomeProducts.EquipmentModeling of conditionsClimatic chambersPermanent climate chamber with ICH light source and exposure control, model KBF LQC 720 (E6), manufactured by Binder (Germany)

Permanent climate chamber with ICH light source and exposure control, model KBF LQC 720 (E6), manufactured by Binder (Germany)

SKU 9020-0334

Uniform temperature distribution is achieved by APT.line™ technology. The photometer, which is equipped with the equipment, consists of two 3D sensors and allows you to adjust the uniformity and intensity of light. The modern controller with a touch screen makes the research process not only convenient, but also efficient thanks to advanced timer functions, etc. APT-COM™ software, in turn, will make the process of documentation and data logging simple and convenient. The German company BINDER will create the best conditions for your success.

Manufacturer

Binder

Моделювання умов
Температурний режим
Контроль вологості
Освітлення
Temperature range, ⁰С
Діапазон вологості
Об'єм, л

Additional information

Important characteristics of KBF LQC series:

  • Temperature range: from 0°C to +70°C;
  • Temperature range under illumination: from +10°C to +60°C;
  • Humidity range: from 10% to 80% fromn. vol.;
  • Three light cassettes with a visible/UV light source complying with ICH directives. Can be installed arbitrarily;
  • Light intensity control using spherical 3D sensors;
  • APT.line™ chamber preheating technology;
  • Humidification is regulated by a capacitive sensor and steam humidification;
  • Advanced programming capabilities with the help of a convenient controller with a touch screen will allow you to put the device offline, as well as control the conditions inside;
  • Standard package of special software from BINDER APT-COM;™
  • Recording measurement data that can be read in an open format via USB port;
  • Error diagnostics system for comprehensive analysis of device status;
  • Inner doors made of tempered glass, tightly closed;
  • Prevention of glass corrosion thanks to a special TIMELESS coating;
  • The inner chamber is made of stainless steel;
  • Three lattice shelves are made of stainless steel;
  • Access port with silicone cap, 30mm in diameter, on the left;
  • 4 reliable double guide castors, 2 with handbrake;
  • Built-in overheat protection device, class 3.1 (DIN 12880) with visual and audible alarm;
  • Ethernet interface;
  • Door heating.

 

Materials for download

Uniform temperature distribution is achieved by APT.line™ technology. The photometer, which is equipped with the equipment, consists of two 3D sensors and allows you to adjust the uniformity and intensity of light. The modern controller with a touch screen makes the research process not only convenient, but also efficient thanks to advanced timer functions, etc. APT-COM™ software, in turn, will make the process of documentation and data logging simple and convenient. The German company BINDER will create the best conditions for your success.

Manufacturer

Binder

Моделювання умов
Температурний режим
Контроль вологості
Освітлення
Temperature range, ⁰С
Діапазон вологості
Об'єм, л

Additional information

Important characteristics of KBF LQC series:

  • Temperature range: from 0°C to +70°C;
  • Temperature range under illumination: from +10°C to +60°C;
  • Humidity range: from 10% to 80% fromn. vol.;
  • Three light cassettes with a visible/UV light source complying with ICH directives. Can be installed arbitrarily;
  • Light intensity control using spherical 3D sensors;
  • APT.line™ chamber preheating technology;
  • Humidification is regulated by a capacitive sensor and steam humidification;
  • Advanced programming capabilities with the help of a convenient controller with a touch screen will allow you to put the device offline, as well as control the conditions inside;
  • Standard package of special software from BINDER APT-COM;™
  • Recording measurement data that can be read in an open format via USB port;
  • Error diagnostics system for comprehensive analysis of device status;
  • Inner doors made of tempered glass, tightly closed;
  • Prevention of glass corrosion thanks to a special TIMELESS coating;
  • The inner chamber is made of stainless steel;
  • Three lattice shelves are made of stainless steel;
  • Access port with silicone cap, 30mm in diameter, on the left;
  • 4 reliable double guide castors, 2 with handbrake;
  • Built-in overheat protection device, class 3.1 (DIN 12880) with visual and audible alarm;
  • Ethernet interface;
  • Door heating.

 

Materials for download

Recommended products