| Type of treated water | Type I water |
| System power supply | From pre-treated water |
| Type I water withdrawal rate | Up to 2 l/min |
| Productivity | 250 l/day |
| Cleaning technologies | Combination of ion exchange resins Jetpore® and innovative ion exchange resins IQnano®, synthetic activated carbon, mercury-free UV lamp 185/254 ech2o® |
Modern system design
The Milli-Q® IQ 7000 system combines state-of-the-art water purification technologies, hydraulic design and software to efficiently produce purified water of type I with high reproducible quality.
Effective combination of water treatment technologies
The IPAK-Meta® and IPAK-Quanta® cartridges use a combination of Jetpore® ion exchange resins and innovative IQnano® ion exchange resins to ensure the resistivity value of purified water at 18.2 MOm·cm. The use of synthetic activated carbon in the IPAK-Quanta® cartridge also allows cleaning trace amounts of organic contaminants after oxidation with the participation of the built-in Milli-Q® IQ 7000 mercury-free UV lamp 185/254 ech2o®.
Simple and intuitive dosing process
By turning the metering flywheel, you can set the required water supply rate to 2 liters per minute. In the “assisted water distribution” mode, the specified volume is selected automatically, and the last milliliters are dosed drip to manually bring the required volume to the mark.
Online CBT measurement
TOC levels are measured online using a modern A10® monitor, which helps to ensure that there are no organic contaminants in the treated water.
Easy data management
The built-in data management system makes it much easier and faster to work with system data, which is displayed on the screen in the form of reports with a few clicks. All data received from Milli-Q® IQ 7000 is stored in the system’s memory, which eliminates the need to maintain paper documentation or separate documents for data storage.
Improving the efficiency of routine work
The graphical interface of the Q-POD® water withdrawal point provides intuitive control, just like when using a smartphone. There is no need to scroll through the user manual – all the information necessary for work is at hand in the form of step-by-step instructions.
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Споживання | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Specifications of treated water system Milli-Q® IQ 7000 | |
|
Specifications for ultrapure water type I, from the point of selection Q-POD |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT | ≤2 ppb |
| Share | No particles 0.22 >μm |
| Bacteria | <0.01 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <1 pg/ml |
| DNAase | <5 pg/ml |
| Protease | <0.15 μg/ml |
| Productivity | From 0,05 to 2 l/min |
| Milli-Q® IQ 7000 system specifications | |||
|
Hydraulic and electrical parameters to the installation site |
|||
| Inlet water inlet valve | Polyethylene tube 6×8 mm, the maximum length from the water source is 5 m | ||
| Water supply to the Q-POD withdrawal point and back to the production unit | Polyethylene tube 6×8 mm (inside the connecting sleeve), maximum length – 5 m | ||
| Point of connection to the mains | Connection according to IEC 13 standard | ||
| ON/OFF exclusion | On the system body | ||
| Where the water leak detector is connected | Maximum 3.3 volts DC | ||
| Where the water level sensor is connected | Maximum 5 volts DC | ||
| Ethernet network port | IEEE P802.3 | ||
|
Electrical connections and specifications |
|||
| Electrical voltage | 220 V ± 10% | ||
| Power supply frequency | 50–60 Hz ± 10% | ||
| Electricity use | 350 VA | ||
| Power wire length | 2.5 m, plug: socket IEC13 | ||
| Operating temperature range | 4–40 °C | ||
| Altitude (above sea level) | Up to 3000 m | ||
| RFID frequency | 13.56 MHz | ||
|
Weight |
Weight with packaging |
Dry weight |
Weight in working condition |
| Milli-Q® IQ 7000 Production Unit | 15 kg | 12.46 kg | 16.06 kg |
Consumables
| Consumables for the Milli-Q® IQ 7000 system | |
|
Cartridges |
|
| IPAK Meta® and IPAK Quanta® deep cleaning cartridge set | IPAKKITA1
|
| IPAK Quanta® fine cartridge | IPAKQUAA1 |
| IPAK Meta® fine cartridge | IPAKMETA1 |
| ech2o® A10 TOC Lamp | ZFA10UVA1 |
| ech2o® UV lamp | ZIQUVLPA1 |
|
Finish filters |
|
| Filter Millipak® 0,22 μm | MPGP002A1 |
| Sterile filter 0.22 μm Millipak® Gold | MPGPG02A1 |
| Biopak® finishing filter | CDUFBI0A1 |
| Finishing filter LC-Pak® | LCPAK00A1 |
| Finishing filter EDS-Pak® | EDSPAK0A1 |
| Finishing filter VOC-Pak® | V0CPAK0A1 |
|
Additional options |
|
| Water intake pedal | ZMQSFTSA1 |
| Water flow measurement sensor | ZWATSENA1 |
| Wall mounting kit | SYSTFIXA1 |
| Sensor for measuring the electrical conductivity of incoming water | ZFC0NDCA1
|
| Additional Q-POD® sampling point with 2m connector
|
ZIQP0DX20
|
| Additional Q-POD® selection point with 5m connector
|
ZIQP0DX50
|
| Type of treated water | Type I water |
| System power supply | From pre-treated water |
| Type I water withdrawal rate | Up to 2 l/min |
| Productivity | 250 l/day |
| Cleaning technologies | Combination of ion exchange resins Jetpore® and innovative ion exchange resins IQnano®, synthetic activated carbon, mercury-free UV lamp 185/254 ech2o® |
Modern system design
The Milli-Q® IQ 7000 system combines state-of-the-art water purification technologies, hydraulic design and software to efficiently produce purified water of type I with high reproducible quality.
Effective combination of water treatment technologies
The IPAK-Meta® and IPAK-Quanta® cartridges use a combination of Jetpore® ion exchange resins and innovative IQnano® ion exchange resins to ensure the resistivity value of purified water at 18.2 MOm·cm. The use of synthetic activated carbon in the IPAK-Quanta® cartridge also allows cleaning trace amounts of organic contaminants after oxidation with the participation of the built-in Milli-Q® IQ 7000 mercury-free UV lamp 185/254 ech2o®.
Simple and intuitive dosing process
By turning the metering flywheel, you can set the required water supply rate to 2 liters per minute. In the “assisted water distribution” mode, the specified volume is selected automatically, and the last milliliters are dosed drip to manually bring the required volume to the mark.
Online CBT measurement
TOC levels are measured online using a modern A10® monitor, which helps to ensure that there are no organic contaminants in the treated water.
Easy data management
The built-in data management system makes it much easier and faster to work with system data, which is displayed on the screen in the form of reports with a few clicks. All data received from Milli-Q® IQ 7000 is stored in the system’s memory, which eliminates the need to maintain paper documentation or separate documents for data storage.
Improving the efficiency of routine work
The graphical interface of the Q-POD® water withdrawal point provides intuitive control, just like when using a smartphone. There is no need to scroll through the user manual – all the information necessary for work is at hand in the form of step-by-step instructions.
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Споживання | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Specifications of treated water system Milli-Q® IQ 7000 | |
|
Specifications for ultrapure water type I, from the point of selection Q-POD |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT | ≤2 ppb |
| Share | No particles 0.22 >μm |
| Bacteria | <0.01 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <1 pg/ml |
| DNAase | <5 pg/ml |
| Protease | <0.15 μg/ml |
| Productivity | From 0,05 to 2 l/min |
| Milli-Q® IQ 7000 system specifications | |||
|
Hydraulic and electrical parameters to the installation site |
|||
| Inlet water inlet valve | Polyethylene tube 6×8 mm, the maximum length from the water source is 5 m | ||
| Water supply to the Q-POD withdrawal point and back to the production unit | Polyethylene tube 6×8 mm (inside the connecting sleeve), maximum length – 5 m | ||
| Point of connection to the mains | Connection according to IEC 13 standard | ||
| ON/OFF exclusion | On the system body | ||
| Where the water leak detector is connected | Maximum 3.3 volts DC | ||
| Where the water level sensor is connected | Maximum 5 volts DC | ||
| Ethernet network port | IEEE P802.3 | ||
|
Electrical connections and specifications |
|||
| Electrical voltage | 220 V ± 10% | ||
| Power supply frequency | 50–60 Hz ± 10% | ||
| Electricity use | 350 VA | ||
| Power wire length | 2.5 m, plug: socket IEC13 | ||
| Operating temperature range | 4–40 °C | ||
| Altitude (above sea level) | Up to 3000 m | ||
| RFID frequency | 13.56 MHz | ||
|
Weight |
Weight with packaging |
Dry weight |
Weight in working condition |
| Milli-Q® IQ 7000 Production Unit | 15 kg | 12.46 kg | 16.06 kg |
Consumables
| Consumables for the Milli-Q® IQ 7000 system | |
|
Cartridges |
|
| IPAK Meta® and IPAK Quanta® deep cleaning cartridge set | IPAKKITA1
|
| IPAK Quanta® fine cartridge | IPAKQUAA1 |
| IPAK Meta® fine cartridge | IPAKMETA1 |
| ech2o® A10 TOC Lamp | ZFA10UVA1 |
| ech2o® UV lamp | ZIQUVLPA1 |
|
Finish filters |
|
| Filter Millipak® 0,22 μm | MPGP002A1 |
| Sterile filter 0.22 μm Millipak® Gold | MPGPG02A1 |
| Biopak® finishing filter | CDUFBI0A1 |
| Finishing filter LC-Pak® | LCPAK00A1 |
| Finishing filter EDS-Pak® | EDSPAK0A1 |
| Finishing filter VOC-Pak® | V0CPAK0A1 |
|
Additional options |
|
| Water intake pedal | ZMQSFTSA1 |
| Water flow measurement sensor | ZWATSENA1 |
| Wall mounting kit | SYSTFIXA1 |
| Sensor for measuring the electrical conductivity of incoming water | ZFC0NDCA1
|
| Additional Q-POD® sampling point with 2m connector
|
ZIQP0DX20
|
| Additional Q-POD® selection point with 5m connector
|
ZIQP0DX50
|
