Universal heat cabinet Isotherm OFA, 240 l

SKU 2110007OFA-240-8

You can monitor the current conditions inside the camera and adjust them using the software panel with PID SmartSense™ microprocessor. Chamber heating is efficient thanks to forced convection and VentiFlow™ ventilation system, which ensure uniform conditions inside. Solaris™ technology, for its part, will take care of high heat output. It is also worth mentioning the variety of useful functions and accessories that will always allow you to add or replace an existing element in your drying cabinet.

Manufacturer	ESCO
Type of equipment	Drying cabinets
Series	OFA
Об'єм камери	176-300 l
Temperature range, ⁰С	25…300°С
Vacuum	No
Work with flammable solvents	No
Air convection
Display	Fluorescent Digital

Additional information

Important advantages of the OFA series:

Temperature range: ambient temperature from +7.5°C to +300°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Housing material – galvanized steel;

The option of making a stainless steel case;

All electronic components are isolated from the working chamber and can be easily replaced;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Remote control is possible thanks to Voyager software;

Low noise from the device.

Materials for download

Annealing, Drying, Healing materials, Heating, High temperature storage, Humidity determination, Material stability studies, Sample drying, Sterilization, Sterilization of dishes and samples, Vulcanization, Work with powders and granules

You can monitor the current conditions inside the camera and adjust them using the software panel with PID SmartSense™ microprocessor. Chamber heating is efficient thanks to forced convection and VentiFlow™ ventilation system, which ensure uniform conditions inside. Solaris™ technology, for its part, will take care of high heat output. It is also worth mentioning the variety of useful functions and accessories that will always allow you to add or replace an existing element in your drying cabinet.

Manufacturer	ESCO
Type of equipment	Drying cabinets
Series	OFA
Об'єм камери	176-300 l
Temperature range, ⁰С	25…300°С
Vacuum	No
Work with flammable solvents	No
Air convection
Display	Fluorescent Digital

Additional information

Important advantages of the OFA series:

Temperature range: ambient temperature from +7.5°C to +300°C;

Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;

4-zone heating system with air casing ensures stable temperature maintenance;

Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;

The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;

Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;

Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;

Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;

The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;

Housing material – galvanized steel;

The option of making a stainless steel case;

All electronic components are isolated from the working chamber and can be easily replaced;

The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;

Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;

Overheating protection device class 3.1 DIN 12880;

Data output via RS485 interface;

Remote control is possible thanks to Voyager software;

Low noise from the device.

Materials for download

SKU 2110007OFA-240-8Annealing, Drying, Healing materials, Heating, High temperature storage, Humidity determination, Material stability studies, Sample drying, Sterilization, Sterilization of dishes and samples, Vulcanization, Work with powders and granules

Universal heat cabinet Isotherm OFA, 240 l

Additional information

Materials for download

Additional information

Materials for download

Recommended products

Universal thermal cabinet FED 260 Binder

Universal heat cabinet E 28 Binder

Thermal chamber M 115 Binder

Automatic laboratory vertical autoclave, 31 l, model 2840ELV-D