alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

Universal heat cabinet Isotherm OFA, 32 l

SKU 2110001OFA-32-8

The control panel will allow you to directly control the heating, while using the built-in PID of the SmartSense™ microprocessor, you can put the equipment in the desired mode of operation. Solaris™ chamber preheating technology will take care of maximum heat transfer, and the VentiFlow™ ventilation system minimizes fluctuations and makes the temperature homogeneous. ESCO guarantees safety and reliability in modeling high-temperature conditions.

Manufacturer

ESCO

Type of equipment

Drying cabinets

Series

OFA

Об'єм камери

20-75 L

Temperature range, ⁰С

25…300°С

Vacuum

No

Work with flammable solvents

No

Air convection
Display

Fluorescent Digital

Additional information

Important advantages of the OFA series:

  • Temperature range: ambient temperature from +7.5°C to +300°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • Housing material – galvanized steel;
  • The option of making a stainless steel case;
  • All electronic components are isolated from the working chamber and can be easily replaced;
  • The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;
  • Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;
  • Overheating protection device class 3.1 DIN 12880;
  • Data output via RS485 interface;
  • Remote control is possible thanks to Voyager software;
  • Low noise from the device.

 

Materials for download

The control panel will allow you to directly control the heating, while using the built-in PID of the SmartSense™ microprocessor, you can put the equipment in the desired mode of operation. Solaris™ chamber preheating technology will take care of maximum heat transfer, and the VentiFlow™ ventilation system minimizes fluctuations and makes the temperature homogeneous. ESCO guarantees safety and reliability in modeling high-temperature conditions.

Manufacturer

ESCO

Type of equipment

Drying cabinets

Series

OFA

Об'єм камери

20-75 L

Temperature range, ⁰С

25…300°С

Vacuum

No

Work with flammable solvents

No

Air convection
Display

Fluorescent Digital

Additional information

Important advantages of the OFA series:

  • Temperature range: ambient temperature from +7.5°C to +300°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • Housing material – galvanized steel;
  • The option of making a stainless steel case;
  • All electronic components are isolated from the working chamber and can be easily replaced;
  • The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;
  • Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;
  • Overheating protection device class 3.1 DIN 12880;
  • Data output via RS485 interface;
  • Remote control is possible thanks to Voyager software;
  • Low noise from the device.

 

Materials for download

Recommended products