alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

Universal heat cabinet Isotherm OFA, 54 l

SKU 2110002OFA-54-8

The basic parameters are monitored using a software panel with integrated PID SmartSense™ microprocessor, which minimizes the risk of any inaccuracies. The temperature also stands out for its reliability thanks to Solaris™ technology, which preheats the chamber on 4 sides. Forced convection combined with the VentiFlow™ ventilation system guarantee the best heat transfer and uniformity. In addition to the above technical parameters, you get safe and easy to operate equipment that will provide your research with the best results.

Manufacturer

ESCO

Type of equipment

Drying cabinets

Series

OFA

Об'єм камери

20-75 L

Temperature range, ⁰С

25…300°С

Vacuum

No

Work with flammable solvents

No

Air convection
Display

Fluorescent Digital

Additional information

Important advantages of the OFA series:

  • Temperature range: ambient temperature from +7.5°C to +300°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • Housing material – galvanized steel;
  • The option of making a stainless steel case;
  • All electronic components are isolated from the working chamber and can be easily replaced;
  • The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;
  • Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;
  • Overheating protection device class 3.1 DIN 12880;
  • Data output via RS485 interface;
  • Remote control is possible thanks to Voyager software;
  • Low noise from the device.

 

Materials for download

The basic parameters are monitored using a software panel with integrated PID SmartSense™ microprocessor, which minimizes the risk of any inaccuracies. The temperature also stands out for its reliability thanks to Solaris™ technology, which preheats the chamber on 4 sides. Forced convection combined with the VentiFlow™ ventilation system guarantee the best heat transfer and uniformity. In addition to the above technical parameters, you get safe and easy to operate equipment that will provide your research with the best results.

Manufacturer

ESCO

Type of equipment

Drying cabinets

Series

OFA

Об'єм камери

20-75 L

Temperature range, ⁰С

25…300°С

Vacuum

No

Work with flammable solvents

No

Air convection
Display

Fluorescent Digital

Additional information

Important advantages of the OFA series:

  • Temperature range: ambient temperature from +7.5°C to +300°C;
  • Solaris™’ advanced chamber preheating design and technology ensure maximum thermal conductivity;
  • 4-zone heating system with air casing ensures stable temperature maintenance;
  • Forced convection will allow you to quickly switch the temperature and reduce the time required to heat the device;
  • The VentiFlow™ ventilation system will increase the homogeneity of the set parameters and minimize fluctuations;
  • Convenient control panel with bright LED display is located at the top of the device and is designed to control and monitor current conditions. PID microprocessor SmartSense™ provides ample opportunities for the selection of programs;
  • Heating elements are located inside the walls of the chamber, which allows to achieve maximum safety during operator operation;
  • Isocide™ outer antibacterial coating, which prevents contamination on the surface of your appliance by 99.9% within 24 hours;
  • The working chamber is made of stainless steel, all corners are rounded, the surface is resistant to corrosion and easy to clean;
  • Housing material – galvanized steel;
  • The option of making a stainless steel case;
  • All electronic components are isolated from the working chamber and can be easily replaced;
  • The device diagnostic function gives access to sensor output and temperature readings from previous operating cycles;
  • Two built-in independent overheating protection systems: electronic protection system, integrated into the microprocessor, and mechanical, with the ability to adjust from the side, does not depend on the microprocessor;
  • Overheating protection device class 3.1 DIN 12880;
  • Data output via RS485 interface;
  • Remote control is possible thanks to Voyager software;
  • Low noise from the device.

 

Materials for download

Recommended products