alsi

EQUIPMENT AND REAGENTS FOR LABORATORIES

EQUIPMENT AND REAGENTSFOR LABORATORIES

CO2 incubator CCL-240B, volume 240 l

SKU 2170058CCL-240B-8

The acidity level is monitored using a modern CO2 infrared sensor, and the VentiFlowTM ventilation system in combination with direct heating of the chamber with a volume of 240 liters will allow you to quickly reach the set temperature. High sterility is supported by the complex of functions ROBUST TM, IsocideTM coating, as well as ultrafine filters (ULPA). The quality of materials and the efficiency of the presented technologies will achieve the best results during incubation.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Об'єм камери

176-300 l

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

No

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+90

Display

Fluorescent Digital

ULPA filter

Yes

Additional information

Important benefits of the CelCulture® CCL-B series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless galvanized steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

Materials for download

The acidity level is monitored using a modern CO2 infrared sensor, and the VentiFlowTM ventilation system in combination with direct heating of the chamber with a volume of 240 liters will allow you to quickly reach the set temperature. High sterility is supported by the complex of functions ROBUST TM, IsocideTM coating, as well as ultrafine filters (ULPA). The quality of materials and the efficiency of the presented technologies will achieve the best results during incubation.

Manufacturer

ESCO

Type of equipment

CO2 incubators

Series

CelCulture®

Об'єм камери

176-300 l

Temperature range, ⁰С

25… 50(60)°С

Oxygen control

No

CO2 sensor with the possibility of sterilization

Yes

Стерилізація

+90

Display

Fluorescent Digital

ULPA filter

Yes

Additional information

Important benefits of the CelCulture® CCL-B series:

  • Patented set of decontamination procedures ROBUST.™ Including the SWIFTCON™ cycle with wet heating technology at 90°C;
  • Temperature range: ambient temperature from +7°C to +60°C;
  • Any gas entering the chamber passes through ultra-fine filters (ULPA);
  • Precision sensor with infrared technology for CO2 control;
  • Seamless galvanized steel chamber design;
  • Intuitive panel for indicating parameters and alarms. The integrated PID SmartSense™ microprocessor will allow you to program the device;
  • The VentiFlow™ ventilation system minimizes fluctuations and promotes temperature uniformity;
  • Isocide™ coating kills 99.9% of bacteria on the surface of the device;
  • CelAlert™ technology with a reminder to replace device components (for example, a carbon dioxide cylinder);
  • Diagnostic system for comprehensive analysis of device operation;
  • Remote control of equipment operation using Voyager® technology;
  • Record measurement data that can be read in an open format via RS485 interface.

Materials for download

Recommended products