| Type of treated water | Type I and type II water |
| System power supply | Directly from the water supply system |
| Type I water withdrawal rate | up to 2 l/min |
| Type I water withdrawal rate | 3/5/10/15 l/h, depending on model |
| Tank volume | 25, 50 or 100 l. |
Combining cleaning technologies with the highest efficiency
High-performance IPAK Gard® and IPAK Quanta® cartridges with synthetic activated carbon and ion exchange resins IQnano®, mercury-free UV lamp 185/254 ech2o®, finishing filters 0.22 microns remove colloids, particles, ions to the trace level, which avoids false results or repeated repetition of cost analyzes.
Convenient access to clean and ultra-clean water
Up to 4 Q-POD/E-POD® water sampling points can be connected to one Milli-Q® IQ® 700X system for water sampling of type I and II, respectively. Access to basic system functions is always at hand thanks to touch displays installed on each POD. The choice of the required speed is available from drip dosing mode up to 2 l / min. There is a “volumetric dosing” mode to set the required volume of water for automatic sampling.
Continuous monitoring of key quality parameters
The most important quality parameters are displayed on the touch display during dosing, for complete confidence in the quality of the purified water. Individual reports on the volume of water consumption, quality parameters for a certain period of time are easily created and exported from the system.
Intelligent purified water storage system
The ventilation filter protects the treated water in the tank from environmental pollution. The mercury-free UV lamp ech2o® as part of the ASM automatic sanitization module prevents bacterial growth and biofilm formation.
Environmentally friendly system
The Milli-Q® IQ 700X is the first and only laboratory system producing ultrapure water directly from tap water using the patented mercury-free UV lamp ech2o®.
Online CBT measurement
Fast and highly accurate TOC measurement is achieved thanks to the best-in-class online A10® monitor.
Simple data management
A powerful built-in data management system allows you to easily and quickly get all the necessary information about the functioning of the system. All data coming from the Milli-Q® IQ 700X is stored in the system’s memory, which allows you to monitor and manage data without creating paper documentation.
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Characteristics of treated water with the Milli-Q® IQ 7003/7005 system | |
|
Characteristics of ultrapure water type I, from the point of withdrawal Q-POD |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT | ≤2 ppb |
| Share | No particles 0.22 >μm |
| Bacteria | <0.01 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <1 pg/ml |
| DNAase | <5 pg/ml |
| Protease | <0.15 μg/ml |
| Productivity | up to 2 l/min |
|
Characteristics of treated water type II, from the point of selection E-POD |
|
| Resistivity at 25 °C | >5 MΩ·cm; usually 10–15 MΩ·cm |
| Electrical conductivity at 25 °C | 0.2 μSm/cm; usually 0.1 μS/cm |
| CBT | ≤30 μg/L (ppb) |
| Productivity | 3 l/g (Milli-Q® IQ 7003) |
| 5 l/g (Milli-Q® IQ 7005) | |
| Share | No particles 0.22 >μm |
| Bacteria | <0.01 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <1 pg/ml |
| DNAase | <5 pg/ml |
| Protease | <0.15 μg/ml |
| Milli-Q® IQ 7003/7005 system specifications | |||
|
Hydraulic and electrical parameters to the installation site |
|||
| Connection type at the input | ½” Gaz | ||
| Distance from the place of incoming water supply | Maximum 5 m | ||
| Distance from production unit to POD selection point | Maximum 5 m | ||
| Distance from production unit to tank | Maximum 5 m | ||
| Power supply | IEC 13 connection | ||
| ON/OFF exclusion | On the system body | ||
| Port for water leakage sensor | Maximum 3.3 volts DC | ||
| Port for adapter level in the tank | Maximum 5 volts DC | ||
| Ethernet port | IEEE P802.3 | ||
|
Electrical connections and specifications |
|||
| Electrical voltage | 100–240 V ± 10% | ||
| Power supply frequency | 50–60 Hz ± 10% | ||
| Electricity use | Maximum 600 VA | ||
| Power wire length | 2.5 m, plug: socket IEC13 | ||
| Operating temperature range | 4–40 °C | ||
| Altitude | Up to 3000 m | ||
| RFID frequency | 13.56 MHz | ||
| Tank material | High purity polyethylene | ||
| Weight | Weight in dry condition | Package weight | Weight in working condition |
| Production unit (7003/7005) | 21.3 kg | 24.2 kg | 26.2 kg |
| Tank (50 l) | 7.6 kg | 10.6 kg | 57.6 kg |
Consumables
| Consumables for Milli-Q® IQ 7003/7005 | |
|
Cartridges |
|
| IPAK Gard® pre-cleaning cartridge | IPAKGARA1 |
| IPAK Quanta® fine cartridge | IPAKQUAA1 |
| Ventfilter | TANKV01A1 |
| Vent filter HF (for high flow rate) | TANKVH1A1 |
|
Finish filters |
|
| Filter Millipak® 0,22 μm | MPGP002A1 |
| Sterile filter 0.22 μm Millipak® Gold | MPGPG02A1 |
| Biopak® finishing filter | CDUFBI0A1 |
| Finishing filter LC-Pak® | LCPAK00A1 |
| Finishing filter EDS-Pak® | EDSPAK0A1 |
| Finishing filter VOC-Pak® | V0CPAK0A1 |
|
Additional options |
|
| Water intake pedal | ZMQSFTSA1 |
| Water leakage sensor | ZWATSENA1 |
| External solenoid valve for inlet water | EXTSV00A1 |
|
System care options |
|
| ROProtect C – chlorine tablets | ZWCL01F50 |
| Type of treated water | Type I and type II water |
| System power supply | Directly from the water supply system |
| Type I water withdrawal rate | up to 2 l/min |
| Type I water withdrawal rate | 3/5/10/15 l/h, depending on model |
| Tank volume | 25, 50 or 100 l. |
Combining cleaning technologies with the highest efficiency
High-performance IPAK Gard® and IPAK Quanta® cartridges with synthetic activated carbon and ion exchange resins IQnano®, mercury-free UV lamp 185/254 ech2o®, finishing filters 0.22 microns remove colloids, particles, ions to the trace level, which avoids false results or repeated repetition of cost analyzes.
Convenient access to clean and ultra-clean water
Up to 4 Q-POD/E-POD® water sampling points can be connected to one Milli-Q® IQ® 700X system for water sampling of type I and II, respectively. Access to basic system functions is always at hand thanks to touch displays installed on each POD. The choice of the required speed is available from drip dosing mode up to 2 l / min. There is a “volumetric dosing” mode to set the required volume of water for automatic sampling.
Continuous monitoring of key quality parameters
The most important quality parameters are displayed on the touch display during dosing, for complete confidence in the quality of the purified water. Individual reports on the volume of water consumption, quality parameters for a certain period of time are easily created and exported from the system.
Intelligent purified water storage system
The ventilation filter protects the treated water in the tank from environmental pollution. The mercury-free UV lamp ech2o® as part of the ASM automatic sanitization module prevents bacterial growth and biofilm formation.
Environmentally friendly system
The Milli-Q® IQ 700X is the first and only laboratory system producing ultrapure water directly from tap water using the patented mercury-free UV lamp ech2o®.
Online CBT measurement
Fast and highly accurate TOC measurement is achieved thanks to the best-in-class online A10® monitor.
Simple data management
A powerful built-in data management system allows you to easily and quickly get all the necessary information about the functioning of the system. All data coming from the Milli-Q® IQ 700X is stored in the system’s memory, which allows you to monitor and manage data without creating paper documentation.
| Manufacturer | |
|---|---|
| Якість очищеної води | |
| Тип живлення | |
| Швидкість відбору води І типу | |
| Валідаційний протокол від виробника | |
| ТОС-індикатор | |
| Віддалена точка відбору води | |
| Управління системою |
Additional information
| Characteristics of treated water with the Milli-Q® IQ 7003/7005 system | |
|
Characteristics of ultrapure water type I, from the point of withdrawal Q-POD |
|
| Resistivity at 25 °C | 18.2 МОм·cm |
| Electrical conductivity at 25 °C | 0.055 μS/cm |
| CBT | ≤2 ppb |
| Share | No particles 0.22 >μm |
| Bacteria | <0.01 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <1 pg/ml |
| DNAase | <5 pg/ml |
| Protease | <0.15 μg/ml |
| Productivity | up to 2 l/min |
|
Characteristics of treated water type II, from the point of selection E-POD |
|
| Resistivity at 25 °C | >5 MΩ·cm; usually 10–15 MΩ·cm |
| Electrical conductivity at 25 °C | 0.2 μSm/cm; usually 0.1 μS/cm |
| CBT | ≤30 μg/L (ppb) |
| Productivity | 3 l/g (Milli-Q® IQ 7003) |
| 5 l/g (Milli-Q® IQ 7005) | |
| Share | No particles 0.22 >μm |
| Bacteria | <0.01 CFU/ml |
| Pyrogens (endotoxins) | <0.001 OE/ml |
| RNases | <1 pg/ml |
| DNAase | <5 pg/ml |
| Protease | <0.15 μg/ml |
| Milli-Q® IQ 7003/7005 system specifications | |||
|
Hydraulic and electrical parameters to the installation site |
|||
| Connection type at the input | ½” Gaz | ||
| Distance from the place of incoming water supply | Maximum 5 m | ||
| Distance from production unit to POD selection point | Maximum 5 m | ||
| Distance from production unit to tank | Maximum 5 m | ||
| Power supply | IEC 13 connection | ||
| ON/OFF exclusion | On the system body | ||
| Port for water leakage sensor | Maximum 3.3 volts DC | ||
| Port for adapter level in the tank | Maximum 5 volts DC | ||
| Ethernet port | IEEE P802.3 | ||
|
Electrical connections and specifications |
|||
| Electrical voltage | 100–240 V ± 10% | ||
| Power supply frequency | 50–60 Hz ± 10% | ||
| Electricity use | Maximum 600 VA | ||
| Power wire length | 2.5 m, plug: socket IEC13 | ||
| Operating temperature range | 4–40 °C | ||
| Altitude | Up to 3000 m | ||
| RFID frequency | 13.56 MHz | ||
| Tank material | High purity polyethylene | ||
| Weight | Weight in dry condition | Package weight | Weight in working condition |
| Production unit (7003/7005) | 21.3 kg | 24.2 kg | 26.2 kg |
| Tank (50 l) | 7.6 kg | 10.6 kg | 57.6 kg |
Consumables
| Consumables for Milli-Q® IQ 7003/7005 | |
|
Cartridges |
|
| IPAK Gard® pre-cleaning cartridge | IPAKGARA1 |
| IPAK Quanta® fine cartridge | IPAKQUAA1 |
| Ventfilter | TANKV01A1 |
| Vent filter HF (for high flow rate) | TANKVH1A1 |
|
Finish filters |
|
| Filter Millipak® 0,22 μm | MPGP002A1 |
| Sterile filter 0.22 μm Millipak® Gold | MPGPG02A1 |
| Biopak® finishing filter | CDUFBI0A1 |
| Finishing filter LC-Pak® | LCPAK00A1 |
| Finishing filter EDS-Pak® | EDSPAK0A1 |
| Finishing filter VOC-Pak® | V0CPAK0A1 |
|
Additional options |
|
| Water intake pedal | ZMQSFTSA1 |
| Water leakage sensor | ZWATSENA1 |
| External solenoid valve for inlet water | EXTSV00A1 |
|
System care options |
|
| ROProtect C – chlorine tablets | ZWCL01F50 |
